Series
B1.853
Swing Clamps with Sturdy Swing Mechanism
Top flange, position monitoring optional
double acting, max. operating pressure 350 bar
double acting, max. operating pressure 350 bar
Downloads
Catalogue sheet
No catalog sheets available.
Operating instructions
Request product
Check Pricing and Availability
Go to Carrlane.com
Information Series
Description
B 1.853 Swing Clamps with Sturdy Swing Mechanism
Hydraulic swing clamps are used for clamping of workpieces, when it is essential to keep the clamping area free of straps and clamping components for unrestricted workpiece loading and unloading.
Due to the sturdy swing mechanism and the manifold possibilities of position monitoring these swing clamps are particularly suited for
- Automatic manufacturing systems
- Clamping fixtures with workpiece loading via handling systems
- Transfer lines
- Test systems for motors, gears and axes
- Assembly lines
- Special machine tools
The hydraulic swing clamp is a pull-type cylinder where a part of the total stroke is used to swing the piston. The favourable area ratio (piston/piston rod) allows high clamping forces already at relatively low oil pressures.
Due to the sturdy swing mechanism the angle position of the clamping arm remains the same after a slight collision with the workpiece during loading
or unloading. Also a collision during the clamping process is not critical.
When using high flow rates the swing speed is limited by installed throttle points. For connection via drilled channels, adjustable throttle valves can be screwed instead of the screw plugs. The FKM wiper at the piston rod can be protected against coarse and hot swarf by an optionally available metallic wiper.
Video
Products (2030)
Loading…
| Item no. | CAD data | functioning | piston diameter [mm] | rod diameter [mm] | max. pulling force [kN] | |
|---|---|---|---|---|---|---|
|
Item no.
|
CAD data
|
Properties
| ||||
|
Item no.
|
CAD data
|
Properties
| ||||
|
Item no.
|
CAD data
|
Properties
| ||||
|
Item no.
|
CAD data
|
Properties
| ||||
|
Item no.
|
CAD data
|
Properties
| ||||
|
Item no.
|
CAD data
|
Properties
| ||||
|
Item no.
|
CAD data
|
Properties
| ||||
|
Item no.
|
CAD data
|
Properties
| ||||
|
Item no.
|
CAD data
|
Properties
| ||||
|
Item no.
|
CAD data
|
Properties
|
Loading…
Item no.
functioning
double acting
piston diameter [mm]
55
rod diameter [mm]
40
max. pulling force [kN]
39.1
max. operating pressure [bar]
350
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
top flange
position monitoring
integrated - pneumatic
pressure range
high pressure
clamping stroke [mm]
15
extended piston rod
without
max. clamping force [kN]
30
swing mechanism
sturdy
overload protection device
without
query of
clamping arm: clamped - piston: unclamped
swing angle [°]
70
swing direction
cw
swing stroke [mm]
20.34
total stroke [mm]
35.34
wiper material
FKM
clamping arm seat
cone 1:10
Item no.
functioning
double acting
piston diameter [mm]
55
rod diameter [mm]
40
max. pulling force [kN]
39.1
max. operating pressure [bar]
350
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
top flange
position monitoring
integrated - pneumatic
pressure range
high pressure
clamping stroke [mm]
15
extended piston rod
without
max. clamping force [kN]
30
swing mechanism
sturdy
overload protection device
without
query of
clamping arm: clamped - piston: unclamped
swing angle [°]
70
swing direction
cw
swing stroke [mm]
20.34
total stroke [mm]
35.34
wiper material
metal
clamping arm seat
cone 1:10
Item no.
functioning
double acting
piston diameter [mm]
55
rod diameter [mm]
40
max. pulling force [kN]
39.1
max. operating pressure [bar]
350
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
top flange
position monitoring
integrated - pneumatic
pressure range
high pressure
clamping stroke [mm]
15
extended piston rod
without
max. clamping force [kN]
30
swing mechanism
sturdy
overload protection device
without
query of
clamping arm: clamped - piston: unclamped
swing angle [°]
75
swing direction
ccw
swing stroke [mm]
21.255
total stroke [mm]
36.255
wiper material
FKM
clamping arm seat
cone 1:10
Item no.
functioning
double acting
piston diameter [mm]
55
rod diameter [mm]
40
max. pulling force [kN]
39.1
max. operating pressure [bar]
350
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
top flange
position monitoring
integrated - pneumatic
pressure range
high pressure
clamping stroke [mm]
15
extended piston rod
without
max. clamping force [kN]
30
swing mechanism
sturdy
overload protection device
without
query of
clamping arm: clamped - piston: unclamped
swing angle [°]
75
swing direction
ccw
swing stroke [mm]
21.255
total stroke [mm]
36.255
wiper material
metal
clamping arm seat
cone 1:10
Item no.
functioning
double acting
piston diameter [mm]
55
rod diameter [mm]
40
max. pulling force [kN]
39.1
max. operating pressure [bar]
350
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
top flange
position monitoring
integrated - pneumatic
pressure range
high pressure
clamping stroke [mm]
15
extended piston rod
without
max. clamping force [kN]
30
swing mechanism
sturdy
overload protection device
without
query of
clamping arm: clamped - piston: unclamped
swing angle [°]
75
swing direction
cw
swing stroke [mm]
21.255
total stroke [mm]
36.255
wiper material
FKM
clamping arm seat
cone 1:10
Item no.
functioning
double acting
piston diameter [mm]
55
rod diameter [mm]
40
max. pulling force [kN]
39.1
max. operating pressure [bar]
350
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
top flange
position monitoring
integrated - pneumatic
pressure range
high pressure
clamping stroke [mm]
15
extended piston rod
without
max. clamping force [kN]
30
swing mechanism
sturdy
overload protection device
without
query of
clamping arm: clamped - piston: unclamped
swing angle [°]
75
swing direction
cw
swing stroke [mm]
21.255
total stroke [mm]
36.255
wiper material
metal
clamping arm seat
cone 1:10
Item no.
functioning
double acting
piston diameter [mm]
55
rod diameter [mm]
40
max. pulling force [kN]
39.1
max. operating pressure [bar]
350
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
top flange
position monitoring
integrated - pneumatic
pressure range
high pressure
clamping stroke [mm]
15
extended piston rod
without
max. clamping force [kN]
30
swing mechanism
sturdy
overload protection device
without
query of
clamping arm: clamped - piston: unclamped
swing angle [°]
90
swing direction
ccw
swing stroke [mm]
24
total stroke [mm]
39
wiper material
FKM
clamping arm seat
cone 1:10
Item no.
functioning
double acting
piston diameter [mm]
55
rod diameter [mm]
40
max. pulling force [kN]
39.1
max. operating pressure [bar]
350
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
top flange
position monitoring
integrated - pneumatic
pressure range
high pressure
clamping stroke [mm]
15
extended piston rod
without
max. clamping force [kN]
30
swing mechanism
sturdy
overload protection device
without
query of
clamping arm: clamped - piston: unclamped
swing angle [°]
90
swing direction
ccw
swing stroke [mm]
24
total stroke [mm]
39
wiper material
metal
clamping arm seat
cone 1:10
Item no.
functioning
double acting
piston diameter [mm]
55
rod diameter [mm]
40
max. pulling force [kN]
39.1
max. operating pressure [bar]
350
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
top flange
position monitoring
integrated - pneumatic
pressure range
high pressure
clamping stroke [mm]
15
extended piston rod
without
max. clamping force [kN]
30
swing mechanism
sturdy
overload protection device
without
query of
clamping arm: clamped - piston: unclamped
swing angle [°]
90
swing direction
cw
swing stroke [mm]
24
total stroke [mm]
39
wiper material
FKM
clamping arm seat
cone 1:10
Item no.
functioning
double acting
piston diameter [mm]
55
rod diameter [mm]
40
max. pulling force [kN]
39.1
max. operating pressure [bar]
350
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
top flange
position monitoring
integrated - pneumatic
pressure range
high pressure
clamping stroke [mm]
15
extended piston rod
without
max. clamping force [kN]
30
swing mechanism
sturdy
overload protection device
without
query of
clamping arm: clamped - piston: unclamped
swing angle [°]
90
swing direction
cw
swing stroke [mm]
24
total stroke [mm]
39
wiper material
metal
clamping arm seat
cone 1:10
Accessories (51)
| Item no. | CAD data | Description |
|---|---|---|
|
Item no.
|
CAD data
|
Description
Angle bracket, complete
for series 1843
as per data sheet B1.852
|
|
Item no.
|
CAD data
|
Description
Angle bracket, complete
for series 1844
as per data sheet B1.852
|
|
Item no.
|
CAD data
|
Description
Angle bracket, complete
for series 1845, 1846 and 1847
as per data sheet B1.852
|
|
Item no.
|
Description
Metallic wiper, complete
for rod diameter 32 mm
as per data sheet B1.852
|
|
|
Item no.
|
Description
Metallic wiper, complete
for series 1847
as per data sheet B1.853
|
|
|
Item no.
|
Description
Metallic wiper, complete
for rod diameter 16 mm
as per data sheet B1.852
|
|
|
Item no.
|
Description
Metallic wiper, complete
for rod diameter 25 mm
as per data sheet B1.852
|
|
|
Item no.
|
CAD data
|
Description
Metallic wiper, complete
for rod diameter 20 mm
as per data sheet B1.852
|
|
Item no.
|
CAD data
|
Description
Electrical position monitoring
for series 1843B0XX/1843M0XX
and 1844B0XX/1844M0XX
with switch and plug
as per data sheet B1.853
|
|
Item no.
|
CAD data
|
Description
Electrical position monitoring
for series 1843B0XX/1843M0XX
and 1844B0XX/1844M0XX
without switch and plug
as per data sheet B1.853
|
Loading…
Registration
New here?
Take advantage of the free benefits of our login area:
- CAD data download
- Download operating instructions
Login
Welcome back
Welcome back! Log in to your already existing user account.
Loading…
Error loading CAD data. Please check your internet connection and try again.
Please note: Our CAD data are generally simplified data and primarily reflect the outer contour and connections of the product (see also Terms of use). Please always refer to the relevant catalogue sheet for the exact dimensions with tolerances, in particular the information on mounting holes or attachments such as special clamps.
Loading…
An unexpected error has occurred. Please reload the page or try again later.