• My requests (0)
      You do not currently have any products added to your request.
      All requests
    Search
    All results
    Contact
    (636) 386-8022 Call now
    [email protected] Contact now
    Series
    B1.853

    Swing Clamps with Sturdy Swing Mechanism

    Top flange, position monitoring optional
    double acting, max. operating pressure 350 bar
    Swing Clamps with Sturdy Swing Mechanism
    Downloads
    Catalogue sheet
    No catalog sheets available.
    Operating instructions
    Request product
    Check Pricing and Availability
    Go to Carrlane.com
    Information Series
    Description
    B 1.853 Swing Clamps with Sturdy Swing Mechanism

    Hydraulic swing clamps are used for clamping of workpieces, when it is essential to keep the clamping area free of straps and clamping components for unrestricted workpiece loading and unloading.
    Due to the sturdy swing mechanism and the manifold possibilities of position monitoring these swing clamps are particularly suited for

    • Automatic manufacturing systems
    • Clamping fixtures with workpiece loading via handling systems
    • Transfer lines
    • Test systems for motors, gears and axes
    • Assembly lines
    • Special machine tools

    The hydraulic swing clamp is a pull-type cylinder where a part of the total stroke is used to swing the piston. The favourable area ratio (piston/piston rod) allows high clamping forces already at relatively low oil pressures.
    Due to the sturdy swing mechanism the angle position of the clamping arm remains the same after a slight collision with the workpiece during loading
    or unloading. Also a collision during the clamping process is not critical.
    When using high flow rates the swing speed is limited by installed throttle points. For connection via drilled channels, adjustable throttle valves can be screwed instead of the screw plugs. The FKM wiper at the piston rod can be protected against coarse and hot swarf by an optionally available metallic wiper.

    Video
    Products (2030)
    body design
    top flange (2030)
    clamping arm seat
    cone 1:10 (2030)
    clamping stroke [mm]
    swing stroke [mm]
    total stroke [mm]
    swing angle [°]
    swing direction
    functioning
    double acting (2030)
    piston diameter [mm]
    rod diameter [mm]
    max. pulling force [kN]
    max. operating pressure [bar]
    350 (2030)
    seals
    NBR (2030)
    hydraulic ports
    pipe thread and manifold connection with O-ring (2030)
    position monitoring
    pressure range
    high pressure (2030)
    extended piston rod
    max. clamping force [kN]
    swing mechanism
    sturdy (2030)
    overload protection device
    without (2030)
    query of
    wiper material
    Item no. CAD datafunctioningpiston diameter [mm]rod diameter [mm]max. pulling force [kN]
    Item no.
    1843A000023D
    CAD data
    functioning
    double acting
    piston diameter [mm]
    23
    rod diameter [mm]
    16
    max. pulling force [kN]
    7.5
    Properties
    Item no.
    1843A000023DM
    CAD data
    functioning
    double acting
    piston diameter [mm]
    23
    rod diameter [mm]
    16
    max. pulling force [kN]
    7.5
    Properties
    Item no.
    1843A015L23D
    CAD data
    functioning
    double acting
    piston diameter [mm]
    23
    rod diameter [mm]
    16
    max. pulling force [kN]
    7.5
    Properties
    Item no.
    1843A015L23DM
    CAD data
    functioning
    double acting
    piston diameter [mm]
    23
    rod diameter [mm]
    16
    max. pulling force [kN]
    7.5
    Properties
    Item no.
    1843A015R23D
    CAD data
    functioning
    double acting
    piston diameter [mm]
    23
    rod diameter [mm]
    16
    max. pulling force [kN]
    7.5
    Properties
    Item no.
    1843A015R23DM
    CAD data
    functioning
    double acting
    piston diameter [mm]
    23
    rod diameter [mm]
    16
    max. pulling force [kN]
    7.5
    Properties
    Item no.
    1843A020L23D
    CAD data
    functioning
    double acting
    piston diameter [mm]
    23
    rod diameter [mm]
    16
    max. pulling force [kN]
    7.5
    Properties
    Item no.
    1843A020L23DM
    CAD data
    functioning
    double acting
    piston diameter [mm]
    23
    rod diameter [mm]
    16
    max. pulling force [kN]
    7.5
    Properties
    Item no.
    1843A020R23D
    CAD data
    functioning
    double acting
    piston diameter [mm]
    23
    rod diameter [mm]
    16
    max. pulling force [kN]
    7.5
    Properties
    Item no.
    1843A020R23DM
    CAD data
    functioning
    double acting
    piston diameter [mm]
    23
    rod diameter [mm]
    16
    max. pulling force [kN]
    7.5
    Properties
    Item no.
    1843A000023D
    functioning
    double acting
    piston diameter [mm]
    23
    rod diameter [mm]
    16
    max. pulling force [kN]
    7.5
    max. operating pressure [bar]
    350
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    top flange
    position monitoring
    without
    pressure range
    high pressure
    clamping stroke [mm]
    23
    extended piston rod
    without
    max. clamping force [kN]
    6
    swing mechanism
    sturdy
    overload protection device
    without
    query of
    without
    swing angle [°]
    swing direction
    none
    swing stroke [mm]
    total stroke [mm]
    23
    wiper material
    FKM
    clamping arm seat
    cone 1:10
    Item no.
    1843A000023DM
    functioning
    double acting
    piston diameter [mm]
    23
    rod diameter [mm]
    16
    max. pulling force [kN]
    7.5
    max. operating pressure [bar]
    350
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    top flange
    position monitoring
    without
    pressure range
    high pressure
    clamping stroke [mm]
    23
    extended piston rod
    without
    max. clamping force [kN]
    6
    swing mechanism
    sturdy
    overload protection device
    without
    query of
    without
    swing angle [°]
    swing direction
    none
    swing stroke [mm]
    total stroke [mm]
    23
    wiper material
    metal
    clamping arm seat
    cone 1:10
    Item no.
    1843A015L23D
    functioning
    double acting
    piston diameter [mm]
    23
    rod diameter [mm]
    16
    max. pulling force [kN]
    7.5
    max. operating pressure [bar]
    350
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    top flange
    position monitoring
    without
    pressure range
    high pressure
    clamping stroke [mm]
    12
    extended piston rod
    without
    max. clamping force [kN]
    6
    swing mechanism
    sturdy
    overload protection device
    without
    query of
    without
    swing angle [°]
    15
    swing direction
    ccw
    swing stroke [mm]
    4.175
    total stroke [mm]
    16.175
    wiper material
    FKM
    clamping arm seat
    cone 1:10
    Item no.
    1843A015L23DM
    functioning
    double acting
    piston diameter [mm]
    23
    rod diameter [mm]
    16
    max. pulling force [kN]
    7.5
    max. operating pressure [bar]
    350
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    top flange
    position monitoring
    without
    pressure range
    high pressure
    clamping stroke [mm]
    12
    extended piston rod
    without
    max. clamping force [kN]
    6
    swing mechanism
    sturdy
    overload protection device
    without
    query of
    without
    swing angle [°]
    15
    swing direction
    ccw
    swing stroke [mm]
    4.175
    total stroke [mm]
    16.175
    wiper material
    metal
    clamping arm seat
    cone 1:10
    Item no.
    1843A015R23D
    functioning
    double acting
    piston diameter [mm]
    23
    rod diameter [mm]
    16
    max. pulling force [kN]
    7.5
    max. operating pressure [bar]
    350
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    top flange
    position monitoring
    without
    pressure range
    high pressure
    clamping stroke [mm]
    12
    extended piston rod
    without
    max. clamping force [kN]
    6
    swing mechanism
    sturdy
    overload protection device
    without
    query of
    without
    swing angle [°]
    15
    swing direction
    cw
    swing stroke [mm]
    4.175
    total stroke [mm]
    16.175
    wiper material
    FKM
    clamping arm seat
    cone 1:10
    Item no.
    1843A015R23DM
    functioning
    double acting
    piston diameter [mm]
    23
    rod diameter [mm]
    16
    max. pulling force [kN]
    7.5
    max. operating pressure [bar]
    350
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    top flange
    position monitoring
    without
    pressure range
    high pressure
    clamping stroke [mm]
    12
    extended piston rod
    without
    max. clamping force [kN]
    6
    swing mechanism
    sturdy
    overload protection device
    without
    query of
    without
    swing angle [°]
    15
    swing direction
    cw
    swing stroke [mm]
    4.175
    total stroke [mm]
    16.175
    wiper material
    metal
    clamping arm seat
    cone 1:10
    Item no.
    1843A020L23D
    functioning
    double acting
    piston diameter [mm]
    23
    rod diameter [mm]
    16
    max. pulling force [kN]
    7.5
    max. operating pressure [bar]
    350
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    top flange
    position monitoring
    without
    pressure range
    high pressure
    clamping stroke [mm]
    12
    extended piston rod
    without
    max. clamping force [kN]
    6
    swing mechanism
    sturdy
    overload protection device
    without
    query of
    without
    swing angle [°]
    20
    swing direction
    ccw
    swing stroke [mm]
    4.63
    total stroke [mm]
    16.63
    wiper material
    FKM
    clamping arm seat
    cone 1:10
    Item no.
    1843A020L23DM
    functioning
    double acting
    piston diameter [mm]
    23
    rod diameter [mm]
    16
    max. pulling force [kN]
    7.5
    max. operating pressure [bar]
    350
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    top flange
    position monitoring
    without
    pressure range
    high pressure
    clamping stroke [mm]
    12
    extended piston rod
    without
    max. clamping force [kN]
    6
    swing mechanism
    sturdy
    overload protection device
    without
    query of
    without
    swing angle [°]
    20
    swing direction
    ccw
    swing stroke [mm]
    4.63
    total stroke [mm]
    16.63
    wiper material
    metal
    clamping arm seat
    cone 1:10
    Item no.
    1843A020R23D
    functioning
    double acting
    piston diameter [mm]
    23
    rod diameter [mm]
    16
    max. pulling force [kN]
    7.5
    max. operating pressure [bar]
    350
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    top flange
    position monitoring
    without
    pressure range
    high pressure
    clamping stroke [mm]
    12
    extended piston rod
    without
    max. clamping force [kN]
    6
    swing mechanism
    sturdy
    overload protection device
    without
    query of
    without
    swing angle [°]
    20
    swing direction
    cw
    swing stroke [mm]
    4.63
    total stroke [mm]
    16.63
    wiper material
    FKM
    clamping arm seat
    cone 1:10
    Item no.
    1843A020R23DM
    functioning
    double acting
    piston diameter [mm]
    23
    rod diameter [mm]
    16
    max. pulling force [kN]
    7.5
    max. operating pressure [bar]
    350
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    top flange
    position monitoring
    without
    pressure range
    high pressure
    clamping stroke [mm]
    12
    extended piston rod
    without
    max. clamping force [kN]
    6
    swing mechanism
    sturdy
    overload protection device
    without
    query of
    without
    swing angle [°]
    20
    swing direction
    cw
    swing stroke [mm]
    4.63
    total stroke [mm]
    16.63
    wiper material
    metal
    clamping arm seat
    cone 1:10
    Accessories (51)
    Item no. CAD data Description
    Item no.
    0353913
    CAD data
    Description
    Pneumatic position monitoring for series 1843B0XX/1843M0XX and 1844B0XX/1844M0XX for swing angle 0° or 90° as per data sheet B1.853
    Item no.
    03539130XX
    CAD data
    Description
    Pneumatic position monitoring for series 1843B0XX/1843M0XX and 1844B0XX/1844M0XX for swing angle 15° to 75° as per data sheet B1.853
    Item no.
    0353914
    CAD data
    Description
    Pneumatic position monitoring for series 1845B0XX/1845M0XX for swing angle 0° or 90° as per data sheet B1.853
    Item no.
    03539140XX
    CAD data
    Description
    Pneumatic position monitoring for series 1845B0XX/1845M0XX for swing angle 15° to 75° as per data sheet B1.853
    Item no.
    0353915
    CAD data
    Description
    Electrical position monitoring for series 1845B0XX/1846B0XX/1847B0XX and 1845M0XX/1846M0XX/1847M0XX with switch and plug as per data sheet B1.853
    Item no.
    0353916
    CAD data
    Description
    Pneumatic position monitoring for series 1846B0XX/1846M0XX for swing angle 0° or 90° as per data sheet B1.853
    Item no.
    03539160XX
    CAD data
    Description
    Pneumatic position monitoring for series 1846B0XX/1846M0XX for swing angle 15° to 75° as per data sheet B1.853
    Item no.
    0353917
    CAD data
    Description
    Electrical position monitoring for series 1845B0XX/1846B0XX/1847B0XX and 1845M0XX/1846M0XX/1847M0XX without switch and plug as per data sheet B1.853
    Item no.
    0353933
    CAD data
    Description
    Pneumatic valve M12x1.5 10 mm stroke switching range 2 to 9 mm max. 10 bar, as per data sheet B1.853
    Item no.
    0353934
    CAD data
    Description
    Pneumatic valve M12x1.5 10 mm stroke switching range 2 to 10 mm max. 10 bar, as per data sheet B1.853
    Error loading CAD data. Please check your internet connection and try again.
    Please note: Our CAD data are generally simplified data and primarily reflect the outer contour and connections of the product (see also Terms of use). Please always refer to the relevant catalogue sheet for the exact dimensions with tolerances, in particular the information on mounting holes or attachments such as special clamps.