Threaded-body cylinders

single acting with spring return
max. operating pressure 500 bar

Downloads

Catalogue sheet

US ES FR PL

Operating instructions

EN ES FR

Information Series

Description

B1.460 Threaded-Body Cylinder

These threaded-body cylinders can be threaded directly into tapped holes in the fixture down to the hex-section of the cylinder body. Spacings between cylinders can be minimised when cylinders are arranged in a row, since the oil is fed through drilled passages in the fixture.
Sealing is made with the supplied sealing ring at the bottom of the location hole.
A long piston guide in combination with an O-ring/back-ring seal provides trouble-free
operation.

Products (15)

Number

Item no.	CAD data	stroke [mm]	functioning	piston diameter [mm]	rod diameter [mm]
Item no. 1460000	CAD data	stroke [mm] 10	functioning single acting with spring return	piston diameter [mm] 12	rod diameter [mm] plunger piston	Properties
Item no. 1460001	CAD data	stroke [mm] 10	functioning single acting with spring return	piston diameter [mm] 12	rod diameter [mm] plunger piston	Properties
Item no. 1460010	CAD data	stroke [mm] 10	functioning single acting with spring return	piston diameter [mm] 12	rod diameter [mm] plunger piston	Properties
Item no. 1461000	CAD data	stroke [mm] 12	functioning single acting with spring return	piston diameter [mm] 16	rod diameter [mm] plunger piston	Properties
Item no. 1461001	CAD data	stroke [mm] 12	functioning single acting with spring return	piston diameter [mm] 16	rod diameter [mm] plunger piston	Properties
Item no. 1461010	CAD data	stroke [mm] 12	functioning single acting with spring return	piston diameter [mm] 16	rod diameter [mm] plunger piston	Properties
Item no. 1462000	CAD data	stroke [mm] 15	functioning single acting with spring return	piston diameter [mm] 20	rod diameter [mm] plunger piston	Properties
Item no. 1462001	CAD data	stroke [mm] 15	functioning single acting with spring return	piston diameter [mm] 20	rod diameter [mm] plunger piston	Properties
Item no. 1462010	CAD data	stroke [mm] 15	functioning single acting with spring return	piston diameter [mm] 20	rod diameter [mm] plunger piston	Properties
Item no. 1463000	CAD data	stroke [mm] 16	functioning single acting with spring return	piston diameter [mm] 25	rod diameter [mm] plunger piston	Properties

Accessories (51)

Number

Item no.	CAD data	Description
Item no. 3614032	CAD data	Description Contact bolt M6 x 10 mm cone head as per data sheet G3.800
Item no. 3614033	CAD data	Description Contact bolt M5 x 9 mm cone head as per data sheet G3.800
Item no. 3614038	CAD data	Description Contact bolt M8 x 8 mm dome head as per data sheet G3.800
Item no. 3614039	CAD data	Description Contact bolt M6 x 6 mm dome head as per data sheet G3.800
Item no. 3614065	CAD data	Description Contact bolt M27 x 32 mm with coupling pin max. 350 bar, as per data sheet G3.800
Item no. 3614066	CAD data	Description Contact bolt M30 x 25 mm with coupling pin max. 350 bar, as per data sheet G3.800
Item no. 3614068	CAD data	Description Contact bolt M6 x 6 mm cone head as per data sheet G3.800
Item no. 3614069	CAD data	Description Contact bolt M8 x 8 mm cone head as per data sheet G3.800
Item no. 3614070	CAD data	Description Contact bolt M10 x 12 mm with coupling pin max. 350 bar, as per data sheet G3.800
Item no. 3614072	CAD data	Description Swivel contact bolt M8 x 8 mm ball - flat face Ø 7.2 mm admissible load 10 kN as per data sheet G3.800

Application examples

Application example 1

Multiple clamping fixture for clamping of small parts. The cylinders can be arranged in clamping bars or yokes.

Application example 2

This multiple clamping fixture is equipped with threaded-body cylinders with swivel contact bolts. The 3° incline of the threaded-body cylinders effects a low-clamping force of approx. 5 % of the clamping force. On plane clamping surfaces swivel contact bolts obtain little surface pressure on the effective points.

Application example 3

Workholding with the use of reversing levers is particularly suited for workpieces which have to be clamped high above the fixture base plate. The force-loop closed within a limited fixture component space eliminates bending forces from entering the fixture base plate. The reversing lever allows easy adaptation of the lever ratio to the clamping force required.