Threaded-body cylinders

single acting with spring return
max. operating pressure 500 bar

Downloads

Catalogue sheet

No catalog sheets available.

Operating instructions

Request product

Check Pricing and Availability

Go to Carrlane.com

Information Series

Description

B1.460 Threaded-Body Cylinder

These threaded-body cylinders can be threaded directly into tapped holes in the fixture down to the hex-section of the cylinder body. Spacings between cylinders can be minimised when cylinders are arranged in a row, since the oil is fed through drilled passages in the fixture.
Sealing is made with the supplied sealing ring at the bottom of the location hole.
A long piston guide in combination with an O-ring/back-ring seal provides trouble-free
operation.

Products (15)

Number

Item no.	CAD data	stroke [mm]	functioning	piston diameter [mm]	rod diameter [mm]
Item no. 1463001	CAD data	stroke [mm] 16	functioning single acting with spring return	piston diameter [mm] 25	rod diameter [mm] plunger piston	Properties
Item no. 1463010	CAD data	stroke [mm] 16	functioning single acting with spring return	piston diameter [mm] 25	rod diameter [mm] plunger piston	Properties
Item no. 1464000	CAD data	stroke [mm] 20	functioning single acting with spring return	piston diameter [mm] 32	rod diameter [mm] plunger piston	Properties
Item no. 1464001	CAD data	stroke [mm] 20	functioning single acting with spring return	piston diameter [mm] 32	rod diameter [mm] plunger piston	Properties
Item no. 1464010	CAD data	stroke [mm] 20	functioning single acting with spring return	piston diameter [mm] 32	rod diameter [mm] plunger piston	Properties

Accessories (15)

Number

Item no.	CAD data	Description
Item no. 3000527	CAD data /	Description Seal-Delrin 46 x 36 x 2,5 mm see page B1.460
Item no. 3000840	CAD data /	Description Seal Delrin 20 x 14 x 1,5 mm see page B1.460
Item no. 3000841	CAD data /	Description Seal Delrin 24 x 18 x 1,5 mm see page B1.460
Item no. 3000842	CAD data /	Description Seal Delrin 28 x 22 x 1,5 mm see page B1.460
Item no. 3000843	CAD data /	Description Seal Delrin 36 x 28 x 2 mm see page B1.460
Item no. 3300088	CAD data	Description Flange nut M38 x 1,5 mm W see page B1.460
Item no. 3300326	CAD data	Description Flange nut DIN 1804 M45 x 1,5 mm see page B1.309
Item no. 3300411	CAD data	Description Flange nut M60 x 1,5 mm W black oxided see page B1.460
Item no. 3301019	CAD data /	Description Groove nut M32 x 1,5 mm W black oxided see page B1.460
Item no. 3301423	CAD data	Description Groove nut M28 x 1,5 mm W black oxided see page B1.460

Application examples

Application example 1

Multiple clamping fixture for clamping of small parts. The cylinders can be arranged in clamping bars or yokes.

Application example 2

This multiple clamping fixture is equipped with threaded-body cylinders with swivel contact bolts. The 3° incline of the threaded-body cylinders effects a low-clamping force of approx. 5 % of the clamping force. On plane clamping surfaces swivel contact bolts obtain little surface pressure on the effective points.

Application example 3

Workholding with the use of reversing levers is particularly suited for workpieces which have to be clamped high above the fixture base plate. The force-loop closed within a limited fixture component space eliminates bending forces from entering the fixture base plate. The reversing lever allows easy adaptation of the lever ratio to the clamping force required.