Series
B1.9501
Threaded-body work supports
with metallic wiper edge, 3 sizes, 3 types of function
single acting, max. operating pressure 500 bar
single acting, max. operating pressure 500 bar
Information Series
Description
B 1.9501 Threaded-Body Work Supports
Hydraulic work supports are used to provide a self-adjusting rest for the workpiece during the machining operations. They compensate the workpiece surface irregularities, also vibration and deflection under machining loads.
The threaded-body design allows for space-saving and direct installation into the fixture body. Oil supply is made through drilled channels.
In the body of the threaded-body work support a thin-walled locking bush is integrated, which locks cylindrically around the freely-movable support plunger when pressurising the element with hydraulic oil. The elements are protected against penetration of swarf by a metallic wiper edge and sealed against liquids. The venting port allows also the connection of positive air pressure protection.
Products (9)
Loading…
| Item no. | CAD data | functioning | max. operating pressure [bar] | seals | hydraulic ports | |
|---|---|---|---|---|---|---|
|
Item no.
|
CAD data
|
Properties
| ||||
|
Item no.
|
CAD data
|
Properties
| ||||
|
Item no.
|
CAD data
|
Properties
| ||||
|
Item no.
|
CAD data
|
Properties
| ||||
|
Item no.
|
CAD data
|
Properties
| ||||
|
Item no.
|
CAD data
|
Properties
| ||||
|
Item no.
|
CAD data
|
Properties
| ||||
|
Item no.
|
CAD data
|
Properties
| ||||
|
Item no.
|
CAD data
|
Properties
|
Loading…
Item no.
functioning
single acting
max. operating pressure [bar]
500
seals
NBR
hydraulic ports
for drilled channels
body design
threaded-body type M45
position monitoring
without
pressure range
high pressure
wiper
FKM with metallic wiper edge
venting of the spring area
with
self-locking
without
bolt type
with contact bolt
min. operating pressure [bar]
100
max. operating temperature [°C]
100
off-position
extended
extending
-
return
with spring force
contact
with spring force
plunger Ø [mm]
20
max. load force [kN]
16.8
plunger stroke [mm]
12
max. flow rate [cm3/s]
-
spring contact force [N]
15-25
pneumatic contact force [N/bar]
-
elastic deformation [µm/kN]
4
Item no.
functioning
single acting
max. operating pressure [bar]
500
seals
NBR
hydraulic ports
for drilled channels
body design
threaded-body type M45
position monitoring
without
pressure range
high pressure
wiper
FKM with metallic wiper edge
venting of the spring area
with
self-locking
without
bolt type
with contact bolt
min. operating pressure [bar]
100
max. operating temperature [°C]
100
off-position
retracted
extending
with air pressure
return
with spring force
contact
with air pressure
plunger Ø [mm]
20
max. load force [kN]
16.8
plunger stroke [mm]
12
max. flow rate [cm3/s]
-
spring contact force [N]
15-25
pneumatic contact force [N/bar]
31
elastic deformation [µm/kN]
4
Item no.
functioning
single acting
max. operating pressure [bar]
500
seals
NBR
hydraulic ports
for drilled channels
body design
threaded-body type M45
position monitoring
without
pressure range
high pressure
wiper
FKM with metallic wiper edge
venting of the spring area
with
self-locking
without
bolt type
with contact bolt
min. operating pressure [bar]
100
max. operating temperature [°C]
100
off-position
retracted
extending
hydraulic
return
with spring force
contact
with spring force
plunger Ø [mm]
20
max. load force [kN]
16.8
plunger stroke [mm]
12
max. flow rate [cm3/s]
25
spring contact force [N]
15-25
pneumatic contact force [N/bar]
-
elastic deformation [µm/kN]
4
Item no.
functioning
single acting
max. operating pressure [bar]
500
seals
NBR
hydraulic ports
for drilled channels
body design
threaded-body type M60
position monitoring
without
pressure range
high pressure
wiper
FKM with metallic wiper edge
venting of the spring area
with
self-locking
without
bolt type
with contact bolt
min. operating pressure [bar]
100
max. operating temperature [°C]
100
off-position
extended
extending
-
return
with spring force
contact
with spring force
plunger Ø [mm]
32
max. load force [kN]
42
plunger stroke [mm]
16
max. flow rate [cm3/s]
-
spring contact force [N]
30-60
pneumatic contact force [N/bar]
-
elastic deformation [µm/kN]
3
Item no.
functioning
single acting
max. operating pressure [bar]
500
seals
NBR
hydraulic ports
for drilled channels
body design
threaded-body type M60
position monitoring
without
pressure range
high pressure
wiper
FKM with metallic wiper edge
venting of the spring area
with
self-locking
without
bolt type
with contact bolt
min. operating pressure [bar]
100
max. operating temperature [°C]
100
off-position
retracted
extending
with air pressure
return
with spring force
contact
with air pressure
plunger Ø [mm]
32
max. load force [kN]
42
plunger stroke [mm]
16
max. flow rate [cm3/s]
-
spring contact force [N]
30-60
pneumatic contact force [N/bar]
80
elastic deformation [µm/kN]
3
Item no.
functioning
single acting
max. operating pressure [bar]
500
seals
NBR
hydraulic ports
for drilled channels
body design
threaded-body type M60
position monitoring
without
pressure range
high pressure
wiper
FKM with metallic wiper edge
venting of the spring area
with
self-locking
without
bolt type
with contact bolt
min. operating pressure [bar]
100
max. operating temperature [°C]
100
off-position
retracted
extending
hydraulic
return
with spring force
contact
with spring force
plunger Ø [mm]
32
max. load force [kN]
42
plunger stroke [mm]
16
max. flow rate [cm3/s]
35
spring contact force [N]
30-60
pneumatic contact force [N/bar]
-
elastic deformation [µm/kN]
3
Item no.
functioning
single acting
max. operating pressure [bar]
500
seals
NBR
hydraulic ports
for drilled channels
body design
threaded-body type M90
position monitoring
without
pressure range
high pressure
wiper
FKM with metallic wiper edge
venting of the spring area
with
self-locking
without
bolt type
with contact bolt
min. operating pressure [bar]
100
max. operating temperature [°C]
100
off-position
extended
extending
-
return
with spring force
contact
with spring force
plunger Ø [mm]
50
max. load force [kN]
102
plunger stroke [mm]
20
max. flow rate [cm3/s]
-
spring contact force [N]
50-100
pneumatic contact force [N/bar]
-
elastic deformation [µm/kN]
2
Item no.
functioning
single acting
max. operating pressure [bar]
500
seals
NBR
hydraulic ports
for drilled channels
body design
threaded-body type M90
position monitoring
without
pressure range
high pressure
wiper
FKM with metallic wiper edge
venting of the spring area
with
self-locking
without
bolt type
with contact bolt
min. operating pressure [bar]
100
max. operating temperature [°C]
100
off-position
retracted
extending
with air pressure
return
with spring force
contact
with air pressure
plunger Ø [mm]
50
max. load force [kN]
102
plunger stroke [mm]
20
max. flow rate [cm3/s]
-
spring contact force [N]
50-100
pneumatic contact force [N/bar]
196
elastic deformation [µm/kN]
2
Item no.
functioning
single acting
max. operating pressure [bar]
500
seals
NBR
hydraulic ports
for drilled channels
body design
threaded-body type M90
position monitoring
without
pressure range
high pressure
wiper
FKM with metallic wiper edge
venting of the spring area
with
self-locking
without
bolt type
with contact bolt
min. operating pressure [bar]
100
max. operating temperature [°C]
100
off-position
retracted
extending
hydraulic
return
with spring force
contact
with spring force
plunger Ø [mm]
50
max. load force [kN]
102
plunger stroke [mm]
20
max. flow rate [cm3/s]
100
spring contact force [N]
50-100
pneumatic contact force [N/bar]
-
elastic deformation [µm/kN]
2
Accessories (21)
| Item no. | CAD data | Description |
|---|---|---|
|
Item no.
|
Description
Air filter G1/4
as per data sheet B1.9501
|
|
|
Item no.
|
Description
throttle screw with nozzle Ø 0.5 mm
as per data sheet B1.9501
|
|
|
Item no.
|
Description
throttle screw with nozzle Ø 0.4 mm
as per data sheet B1.9501
|
|
|
Item no.
|
Description
throttle screw with nozzle Ø 0.7 mm
as per data sheet B1.9501
|
|
|
Item no.
|
Description
Insertion nipple fitting - size M5
as per data sheet G0.110
|
|
|
Item no.
|
CAD data
|
Description
Insertion nipple fitting - size 1/8
as per data sheet G0.110
|
|
Item no.
|
Description
Insertion nipple fitting - size 1/4
as per data sheet G0.110
|
|
|
Item no.
|
Description
Plastic hose, black
as per data sheet G0.110
|
|
|
Item no.
|
Description
Connecting nipple
with throttle nozzle Ø 0.4 mm
as per data sheet B1.9501
|
|
|
Item no.
|
Description
Connecting nipple
with throttle nozzle Ø 0.5 mm
as per data sheet B1.9501
|
Loading…
Registration
New here?
Take advantage of the free benefits of our login area:
- CAD data download
- Download operating instructions
Login
Welcome back
Welcome back! Log in to your already existing user account.
Loading…
Error loading CAD data. Please check your internet connection and try again.
Please note: Our CAD data are generally simplified data and primarily reflect the outer contour and connections of the product (see also Terms of use). Please always refer to the relevant catalogue sheet for the exact dimensions with tolerances, in particular the information on mounting holes or attachments such as special clamps.
Loading…
An unexpected error has occurred. Please reload the page or try again later.