Contact
Series
B1.9501

Threaded-body work supports

with metallic wiper edge, 3 sizes, 3 types of function
single acting, max. operating pressure 500 bar
Threaded-body work supports
Downloads
Catalogue sheet
Operating instructions
Information Series
Description
B 1.9501 Threaded-Body Work Supports

Hydraulic work supports are used to provide a self-adjusting rest for the workpiece during the machining operations. They compensate the workpiece surface irregularities, also vibration and deflection under machining loads.
The threaded-body design allows for space-saving and direct installation into the fixture body. Oil supply is made through drilled channels.

In the body of the threaded-body work support a thin-walled locking bush is integrated, which locks cylindrically around the freely-movable support plunger when pressurising the element with hydraulic oil. The elements are protected against penetration of swarf by a metallic wiper edge and sealed against liquids. The venting port allows also the connection of positive air pressure protection.

Products (9)
Loading…
body design
functioning
single acting (9)
max. operating pressure [bar]
500 (9)
seals
NBR (9)
hydraulic ports
for drilled channels (9)
position monitoring
without (9)
pressure range
high pressure (9)
wiper
FKM with metallic wiper edge (9)
venting of the spring area
with (9)
self-locking
without (9)
bolt type
with contact bolt (9)
min. operating pressure [bar]
100 (9)
max. operating temperature [°C]
100 (9)
off-position
extending
return
with spring force (9)
contact
plunger Ø [mm]
max. load force [kN]
plunger stroke [mm]
max. flow rate [cm3/s]
spring contact force [N]
pneumatic contact force [N/bar]
elastic deformation [µm/kN]
Item no. CAD datafunctioningmax. operating pressure [bar]sealshydraulic ports
Item no.
CAD data
functioning
single acting
max. operating pressure [bar]
500
seals
NBR
hydraulic ports
for drilled channels
Properties
Item no.
CAD data
functioning
single acting
max. operating pressure [bar]
500
seals
NBR
hydraulic ports
for drilled channels
Properties
Item no.
CAD data
functioning
single acting
max. operating pressure [bar]
500
seals
NBR
hydraulic ports
for drilled channels
Properties
Item no.
CAD data
functioning
single acting
max. operating pressure [bar]
500
seals
NBR
hydraulic ports
for drilled channels
Properties
Item no.
CAD data
functioning
single acting
max. operating pressure [bar]
500
seals
NBR
hydraulic ports
for drilled channels
Properties
Item no.
CAD data
functioning
single acting
max. operating pressure [bar]
500
seals
NBR
hydraulic ports
for drilled channels
Properties
Item no.
CAD data
functioning
single acting
max. operating pressure [bar]
500
seals
NBR
hydraulic ports
for drilled channels
Properties
Item no.
CAD data
functioning
single acting
max. operating pressure [bar]
500
seals
NBR
hydraulic ports
for drilled channels
Properties
Item no.
CAD data
functioning
single acting
max. operating pressure [bar]
500
seals
NBR
hydraulic ports
for drilled channels
Properties
Loading…
Item no.
functioning
single acting
max. operating pressure [bar]
500
seals
NBR
hydraulic ports
for drilled channels
body design
threaded-body type M45
position monitoring
without
pressure range
high pressure
wiper
FKM with metallic wiper edge
venting of the spring area
with
self-locking
without
bolt type
with contact bolt
min. operating pressure [bar]
100
max. operating temperature [°C]
100
off-position
extended
extending
-
return
with spring force
contact
with spring force
plunger Ø [mm]
20
max. load force [kN]
16.8
plunger stroke [mm]
12
max. flow rate [cm3/s]
-
spring contact force [N]
15-25
pneumatic contact force [N/bar]
-
elastic deformation [µm/kN]
4
Item no.
functioning
single acting
max. operating pressure [bar]
500
seals
NBR
hydraulic ports
for drilled channels
body design
threaded-body type M45
position monitoring
without
pressure range
high pressure
wiper
FKM with metallic wiper edge
venting of the spring area
with
self-locking
without
bolt type
with contact bolt
min. operating pressure [bar]
100
max. operating temperature [°C]
100
off-position
retracted
extending
with air pressure
return
with spring force
contact
with air pressure
plunger Ø [mm]
20
max. load force [kN]
16.8
plunger stroke [mm]
12
max. flow rate [cm3/s]
-
spring contact force [N]
15-25
pneumatic contact force [N/bar]
31
elastic deformation [µm/kN]
4
Item no.
functioning
single acting
max. operating pressure [bar]
500
seals
NBR
hydraulic ports
for drilled channels
body design
threaded-body type M45
position monitoring
without
pressure range
high pressure
wiper
FKM with metallic wiper edge
venting of the spring area
with
self-locking
without
bolt type
with contact bolt
min. operating pressure [bar]
100
max. operating temperature [°C]
100
off-position
retracted
extending
hydraulic
return
with spring force
contact
with spring force
plunger Ø [mm]
20
max. load force [kN]
16.8
plunger stroke [mm]
12
max. flow rate [cm3/s]
25
spring contact force [N]
15-25
pneumatic contact force [N/bar]
-
elastic deformation [µm/kN]
4
Item no.
functioning
single acting
max. operating pressure [bar]
500
seals
NBR
hydraulic ports
for drilled channels
body design
threaded-body type M60
position monitoring
without
pressure range
high pressure
wiper
FKM with metallic wiper edge
venting of the spring area
with
self-locking
without
bolt type
with contact bolt
min. operating pressure [bar]
100
max. operating temperature [°C]
100
off-position
extended
extending
-
return
with spring force
contact
with spring force
plunger Ø [mm]
32
max. load force [kN]
42
plunger stroke [mm]
16
max. flow rate [cm3/s]
-
spring contact force [N]
30-60
pneumatic contact force [N/bar]
-
elastic deformation [µm/kN]
3
Item no.
functioning
single acting
max. operating pressure [bar]
500
seals
NBR
hydraulic ports
for drilled channels
body design
threaded-body type M60
position monitoring
without
pressure range
high pressure
wiper
FKM with metallic wiper edge
venting of the spring area
with
self-locking
without
bolt type
with contact bolt
min. operating pressure [bar]
100
max. operating temperature [°C]
100
off-position
retracted
extending
with air pressure
return
with spring force
contact
with air pressure
plunger Ø [mm]
32
max. load force [kN]
42
plunger stroke [mm]
16
max. flow rate [cm3/s]
-
spring contact force [N]
30-60
pneumatic contact force [N/bar]
80
elastic deformation [µm/kN]
3
Item no.
functioning
single acting
max. operating pressure [bar]
500
seals
NBR
hydraulic ports
for drilled channels
body design
threaded-body type M60
position monitoring
without
pressure range
high pressure
wiper
FKM with metallic wiper edge
venting of the spring area
with
self-locking
without
bolt type
with contact bolt
min. operating pressure [bar]
100
max. operating temperature [°C]
100
off-position
retracted
extending
hydraulic
return
with spring force
contact
with spring force
plunger Ø [mm]
32
max. load force [kN]
42
plunger stroke [mm]
16
max. flow rate [cm3/s]
35
spring contact force [N]
30-60
pneumatic contact force [N/bar]
-
elastic deformation [µm/kN]
3
Item no.
functioning
single acting
max. operating pressure [bar]
500
seals
NBR
hydraulic ports
for drilled channels
body design
threaded-body type M90
position monitoring
without
pressure range
high pressure
wiper
FKM with metallic wiper edge
venting of the spring area
with
self-locking
without
bolt type
with contact bolt
min. operating pressure [bar]
100
max. operating temperature [°C]
100
off-position
extended
extending
-
return
with spring force
contact
with spring force
plunger Ø [mm]
50
max. load force [kN]
102
plunger stroke [mm]
20
max. flow rate [cm3/s]
-
spring contact force [N]
50-100
pneumatic contact force [N/bar]
-
elastic deformation [µm/kN]
2
Item no.
functioning
single acting
max. operating pressure [bar]
500
seals
NBR
hydraulic ports
for drilled channels
body design
threaded-body type M90
position monitoring
without
pressure range
high pressure
wiper
FKM with metallic wiper edge
venting of the spring area
with
self-locking
without
bolt type
with contact bolt
min. operating pressure [bar]
100
max. operating temperature [°C]
100
off-position
retracted
extending
with air pressure
return
with spring force
contact
with air pressure
plunger Ø [mm]
50
max. load force [kN]
102
plunger stroke [mm]
20
max. flow rate [cm3/s]
-
spring contact force [N]
50-100
pneumatic contact force [N/bar]
196
elastic deformation [µm/kN]
2
Item no.
functioning
single acting
max. operating pressure [bar]
500
seals
NBR
hydraulic ports
for drilled channels
body design
threaded-body type M90
position monitoring
without
pressure range
high pressure
wiper
FKM with metallic wiper edge
venting of the spring area
with
self-locking
without
bolt type
with contact bolt
min. operating pressure [bar]
100
max. operating temperature [°C]
100
off-position
retracted
extending
hydraulic
return
with spring force
contact
with spring force
plunger Ø [mm]
50
max. load force [kN]
102
plunger stroke [mm]
20
max. flow rate [cm3/s]
100
spring contact force [N]
50-100
pneumatic contact force [N/bar]
-
elastic deformation [µm/kN]
2
Accessories (21)
Item no. CAD data Description
Item no.
CAD data
/
Description
Seal kit, external seals for 1953-020/-021/-022 as per data sheet S0.001
Item no.
CAD data
/
Description
Seal kit, external seals for 1955-020/-021/-022 as per data sheet S0.001
Item no.
CAD data
/
Description
Seal kit, external seals for 1957-020/-021/-022 as per data sheet S0.001
Item no.
CAD data
Description
Sealing plug G1/8 with thread sealing ring with hexagon socket SW4 max. 500 bar, as per data sheet F9.300
Item no.
CAD data
Description
Sealing plug G1/4 with thread sealing ring with hexagon socket SW6 max. 500 bar, as per data sheet F9.300
Item no.
CAD data
/
Description
Sealing ring for contact bolt as per data sheet B1.9501
Item no.
CAD data
/
Description
Sealing ring for contact bolt as per data sheet B1.9501
Item no.
CAD data
/
Description
Set screw M5 x 6 mm as per data sheet B1.9501
Item no.
CAD data
/
Description
Set screw M3 x 4 mm as per data sheet B1.9501
Item no.
CAD data
/
Description
Air filter G1/8 as per data sheet B1.9501
Loading…