• My requests (0)
      You do not currently have any products added to your request.
      All requests
    Search
    All results
    Contact
    (636) 386-8022 Call now
    [email protected] Contact now
    Series
    B1.8801

    Swing Clamps with Reinforced Swing Mechanism

    Top flange, position monitoring optional
    double acting, max. operating pressure 500 bar
    Swing Clamps with Reinforced Swing Mechanism
    Downloads
    Catalogue sheet
    USESFR
    Operating instructions
    Information Series
    Description
    B 1.8801 Swing Clamps with Reinforced Swing Mechanism

    Hydraulic swing clamps are used for clamping of  workpieces when it is essential  to keep the clamping area free of straps and clamping components for unrestricted workpiece loading and unloading. Due to the sturdy swing mechanism 
    and the extended switch rod they are particularly suited for:

    • Clamping fixtures with workpiece loading via handling systems
    • Transfer lines
    • Test systems for motors, gears, axes, etc.
    • Automatic manufacturing systems
    • Assembly lines

    This line is a further development of the proved ROEMHELD swing clamps with the aim to improve process safety in linked clamping systems. The most important data are as follows:

    1. Omission of the overload protection device
    In the case of a slight collision with the clamping arm during loading and unloading of the fixture, the angular position of the clamping arm will be maintained. Less critical are the weight of the clamping arm or an increased swing speed.

    2. Reinforced swing mechanism
    The reinforced swing mechanism endures a collision of the clamping arm with the workpiece during clamping up to a pressure of 100 bar.

    3. FKM wiper
    This wiper has a high chemical resistance when using aggressive cutting fluids.

    4. Further types of bodies
    Flange at the bottom: B 1.8811 
    Threaded-body type: B 1.892

    Products (84)
    body design
    top flange (84)
    clamping arm seat
    cone 1:10 (84)
    clamping stroke [mm]
    swing stroke [mm]
    total stroke [mm]
    swing angle [°]
    swing direction
    functioning
    double acting (84)
    piston diameter [mm]
    rod diameter [mm]
    max. pulling force [kN]
    max. operating pressure [bar]
    500 (84)
    seals
    NBR (84)
    hydraulic ports
    pipe thread and manifold connection with O-ring (84)
    position monitoring
    pressure range
    high pressure (84)
    extended piston rod
    max. clamping force [kN]
    swing mechanism
    reinforced (84)
    overload protection device
    without (84)
    query of
    wiper material
    Item no. CAD datafunctioningpiston diameter [mm]rod diameter [mm]max. pulling force [kN]
    Item no.
    1897443VDH38
    CAD data
    functioning
    double acting
    piston diameter [mm]
    63
    rod diameter [mm]
    50
    max. pulling force [kN]
    57.7
    Properties
    Item no.
    1897443VDM38
    CAD data
    functioning
    double acting
    piston diameter [mm]
    63
    rod diameter [mm]
    50
    max. pulling force [kN]
    57.7
    Properties
    Item no.
    1897443VMH38
    CAD data
    functioning
    double acting
    piston diameter [mm]
    63
    rod diameter [mm]
    50
    max. pulling force [kN]
    57.7
    Properties
    Item no.
    1897443VMM38
    CAD data
    functioning
    double acting
    piston diameter [mm]
    63
    rod diameter [mm]
    50
    max. pulling force [kN]
    57.7
    Properties
    Item no.
    1897443VDH38
    functioning
    double acting
    piston diameter [mm]
    63
    rod diameter [mm]
    50
    max. pulling force [kN]
    57.7
    max. operating pressure [bar]
    500
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    top flange
    position monitoring
    without
    pressure range
    high pressure
    clamping stroke [mm]
    38
    extended piston rod
    without
    max. clamping force [kN]
    41
    swing mechanism
    reinforced
    overload protection device
    without
    query of
    without
    swing angle [°]
    swing direction
    none
    swing stroke [mm]
    total stroke [mm]
    38
    wiper material
    FKM
    clamping arm seat
    cone 1:10
    Item no.
    1897443VDM38
    functioning
    double acting
    piston diameter [mm]
    63
    rod diameter [mm]
    50
    max. pulling force [kN]
    57.7
    max. operating pressure [bar]
    500
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    top flange
    position monitoring
    without
    pressure range
    high pressure
    clamping stroke [mm]
    38
    extended piston rod
    without
    max. clamping force [kN]
    41
    swing mechanism
    reinforced
    overload protection device
    without
    query of
    without
    swing angle [°]
    swing direction
    none
    swing stroke [mm]
    total stroke [mm]
    38
    wiper material
    metal
    clamping arm seat
    cone 1:10
    Item no.
    1897443VMH38
    functioning
    double acting
    piston diameter [mm]
    63
    rod diameter [mm]
    50
    max. pulling force [kN]
    57.7
    max. operating pressure [bar]
    500
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    top flange
    position monitoring
    accessory: electrical or pneumatic
    pressure range
    high pressure
    clamping stroke [mm]
    38
    extended piston rod
    with
    max. clamping force [kN]
    41
    swing mechanism
    reinforced
    overload protection device
    without
    query of
    piston: clamped and unclamped
    swing angle [°]
    swing direction
    none
    swing stroke [mm]
    total stroke [mm]
    38
    wiper material
    FKM
    clamping arm seat
    cone 1:10
    Item no.
    1897443VMM38
    functioning
    double acting
    piston diameter [mm]
    63
    rod diameter [mm]
    50
    max. pulling force [kN]
    57.7
    max. operating pressure [bar]
    500
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    top flange
    position monitoring
    accessory: electrical or pneumatic
    pressure range
    high pressure
    clamping stroke [mm]
    38
    extended piston rod
    with
    max. clamping force [kN]
    41
    swing mechanism
    reinforced
    overload protection device
    without
    query of
    piston: clamped and unclamped
    swing angle [°]
    swing direction
    none
    swing stroke [mm]
    total stroke [mm]
    38
    wiper material
    metal
    clamping arm seat
    cone 1:10
    Accessories (12)
    Item no. CAD data Description
    Item no.
    0341100
    CAD data
    /
    Description
    Metallic wiper, complete for rod diameter 32 mm as per data sheet B1.852
    Item no.
    0341101
    CAD data
    /
    Description
    Metallic wiper, complete for series 1847 as per data sheet B1.853
    Item no.
    0341102
    CAD data
    /
    Description
    Metallic wiper, complete for series 1897 as per data sheet B1.880
    Item no.
    0353808
    CAD data
    Description
    Pneumatic position monitoring, complete for 1895-XXX-VMX35 as per data sheet B1.8801
    Item no.
    0353809
    CAD data
    Description
    Pneumatic position monitoring, complete for 1896-XXX-VMX36 as per data sheet B1.8801
    Item no.
    0353810
    CAD data
    Description
    Pneumatic position monitoring, complete for 1897-XXX-VMX38 as per data sheet B1.8801
    Item no.
    0353811
    CAD data
    Description
    Electrical position monitoring with standard switch and angle plug for 1896/1897-XXX-VMX36/38 as per data sheet B1.8801
    Item no.
    0353813
    CAD data
    Description
    Electrical position monitoring without switch for 1896/1897-XXX-VMX36/38 as per data sheet B1.8801
    Item no.
    0353814
    CAD data
    Description
    Electrical position monitoring with standard switch and angle plug for 1895-XXX-VMX35 as per data sheet B1.8801
    Item no.
    0353815
    CAD data
    Description
    Electrical position monitoring without switch for 1895-XXX-VMX35 as per data sheet B1.8801
    Error loading CAD data. Please check your internet connection and try again.
    Please note: Our CAD data are generally simplified data and primarily reflect the outer contour and connections of the product (see also Terms of use). Please always refer to the relevant catalogue sheet for the exact dimensions with tolerances, in particular the information on mounting holes or attachments such as special clamps.