• My requests (0)
      You do not currently have any products added to your request.
      All requests
    Search
    All results
    Contact
    (636) 386-8022 Call now
    [email protected] Contact now
    Series
    B1.8801

    Swing Clamps with Reinforced Swing Mechanism

    Top flange, position monitoring optional
    double acting, max. operating pressure 500 bar
    Swing Clamps with Reinforced Swing Mechanism
    Downloads
    Catalogue sheet
    USESFR
    Operating instructions
    Information Series
    Description
    B 1.8801 Swing Clamps with Reinforced Swing Mechanism

    Hydraulic swing clamps are used for clamping of  workpieces when it is essential  to keep the clamping area free of straps and clamping components for unrestricted workpiece loading and unloading. Due to the sturdy swing mechanism 
    and the extended switch rod they are particularly suited for:

    • Clamping fixtures with workpiece loading via handling systems
    • Transfer lines
    • Test systems for motors, gears, axes, etc.
    • Automatic manufacturing systems
    • Assembly lines

    This line is a further development of the proved ROEMHELD swing clamps with the aim to improve process safety in linked clamping systems. The most important data are as follows:

    1. Omission of the overload protection device
    In the case of a slight collision with the clamping arm during loading and unloading of the fixture, the angular position of the clamping arm will be maintained. Less critical are the weight of the clamping arm or an increased swing speed.

    2. Reinforced swing mechanism
    The reinforced swing mechanism endures a collision of the clamping arm with the workpiece during clamping up to a pressure of 100 bar.

    3. FKM wiper
    This wiper has a high chemical resistance when using aggressive cutting fluids.

    4. Further types of bodies
    Flange at the bottom: B 1.8811 
    Threaded-body type: B 1.892

    Products (84)
    body design
    top flange (84)
    clamping arm seat
    cone 1:10 (84)
    clamping stroke [mm]
    swing stroke [mm]
    total stroke [mm]
    swing angle [°]
    swing direction
    functioning
    double acting (84)
    piston diameter [mm]
    rod diameter [mm]
    max. pulling force [kN]
    max. operating pressure [bar]
    500 (84)
    seals
    NBR (84)
    hydraulic ports
    pipe thread and manifold connection with O-ring (84)
    position monitoring
    pressure range
    high pressure (84)
    extended piston rod
    max. clamping force [kN]
    swing mechanism
    reinforced (84)
    overload protection device
    without (84)
    query of
    wiper material
    Item no. CAD datafunctioningpiston diameter [mm]rod diameter [mm]max. pulling force [kN]
    Item no.
    1895303VDH35
    CAD data
    functioning
    double acting
    piston diameter [mm]
    40
    rod diameter [mm]
    32
    max. pulling force [kN]
    22.6
    Properties
    Item no.
    1895303VDM35
    CAD data
    functioning
    double acting
    piston diameter [mm]
    40
    rod diameter [mm]
    32
    max. pulling force [kN]
    22.6
    Properties
    Item no.
    1895303VMH35
    CAD data
    functioning
    double acting
    piston diameter [mm]
    40
    rod diameter [mm]
    32
    max. pulling force [kN]
    22.6
    Properties
    Item no.
    1895303VMM35
    CAD data
    functioning
    double acting
    piston diameter [mm]
    40
    rod diameter [mm]
    32
    max. pulling force [kN]
    22.6
    Properties
    Item no.
    1895323VDH35
    CAD data
    functioning
    double acting
    piston diameter [mm]
    40
    rod diameter [mm]
    32
    max. pulling force [kN]
    22.6
    Properties
    Item no.
    1895323VDM35
    CAD data
    functioning
    double acting
    piston diameter [mm]
    40
    rod diameter [mm]
    32
    max. pulling force [kN]
    22.6
    Properties
    Item no.
    1895323VMH35
    CAD data
    functioning
    double acting
    piston diameter [mm]
    40
    rod diameter [mm]
    32
    max. pulling force [kN]
    22.6
    Properties
    Item no.
    1895323VMM35
    CAD data
    functioning
    double acting
    piston diameter [mm]
    40
    rod diameter [mm]
    32
    max. pulling force [kN]
    22.6
    Properties
    Item no.
    1895333VDH35
    CAD data
    functioning
    double acting
    piston diameter [mm]
    40
    rod diameter [mm]
    32
    max. pulling force [kN]
    22.6
    Properties
    Item no.
    1895333VDM35
    CAD data
    functioning
    double acting
    piston diameter [mm]
    40
    rod diameter [mm]
    32
    max. pulling force [kN]
    22.6
    Properties
    Item no.
    1895303VDH35
    functioning
    double acting
    piston diameter [mm]
    40
    rod diameter [mm]
    32
    max. pulling force [kN]
    22.6
    max. operating pressure [bar]
    500
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    top flange
    position monitoring
    without
    pressure range
    high pressure
    clamping stroke [mm]
    22
    extended piston rod
    without
    max. clamping force [kN]
    16.5
    swing mechanism
    reinforced
    overload protection device
    without
    query of
    without
    swing angle [°]
    90
    swing direction
    cw
    swing stroke [mm]
    13
    total stroke [mm]
    35
    wiper material
    FKM
    clamping arm seat
    cone 1:10
    Item no.
    1895303VDM35
    functioning
    double acting
    piston diameter [mm]
    40
    rod diameter [mm]
    32
    max. pulling force [kN]
    22.6
    max. operating pressure [bar]
    500
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    top flange
    position monitoring
    without
    pressure range
    high pressure
    clamping stroke [mm]
    22
    extended piston rod
    without
    max. clamping force [kN]
    16.5
    swing mechanism
    reinforced
    overload protection device
    without
    query of
    without
    swing angle [°]
    90
    swing direction
    cw
    swing stroke [mm]
    13
    total stroke [mm]
    35
    wiper material
    metal
    clamping arm seat
    cone 1:10
    Item no.
    1895303VMH35
    functioning
    double acting
    piston diameter [mm]
    40
    rod diameter [mm]
    32
    max. pulling force [kN]
    22.6
    max. operating pressure [bar]
    500
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    top flange
    position monitoring
    accessory: electrical or pneumatic
    pressure range
    high pressure
    clamping stroke [mm]
    22
    extended piston rod
    with
    max. clamping force [kN]
    16.5
    swing mechanism
    reinforced
    overload protection device
    without
    query of
    piston: clamped and unclamped
    swing angle [°]
    90
    swing direction
    cw
    swing stroke [mm]
    13
    total stroke [mm]
    35
    wiper material
    FKM
    clamping arm seat
    cone 1:10
    Item no.
    1895303VMM35
    functioning
    double acting
    piston diameter [mm]
    40
    rod diameter [mm]
    32
    max. pulling force [kN]
    22.6
    max. operating pressure [bar]
    500
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    top flange
    position monitoring
    accessory: electrical or pneumatic
    pressure range
    high pressure
    clamping stroke [mm]
    22
    extended piston rod
    with
    max. clamping force [kN]
    16.5
    swing mechanism
    reinforced
    overload protection device
    without
    query of
    piston: clamped and unclamped
    swing angle [°]
    90
    swing direction
    cw
    swing stroke [mm]
    13
    total stroke [mm]
    35
    wiper material
    metal
    clamping arm seat
    cone 1:10
    Item no.
    1895323VDH35
    functioning
    double acting
    piston diameter [mm]
    40
    rod diameter [mm]
    32
    max. pulling force [kN]
    22.6
    max. operating pressure [bar]
    500
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    top flange
    position monitoring
    without
    pressure range
    high pressure
    clamping stroke [mm]
    22
    extended piston rod
    without
    max. clamping force [kN]
    16.5
    swing mechanism
    reinforced
    overload protection device
    without
    query of
    without
    swing angle [°]
    60
    swing direction
    cw
    swing stroke [mm]
    13
    total stroke [mm]
    35
    wiper material
    FKM
    clamping arm seat
    cone 1:10
    Item no.
    1895323VDM35
    functioning
    double acting
    piston diameter [mm]
    40
    rod diameter [mm]
    32
    max. pulling force [kN]
    22.6
    max. operating pressure [bar]
    500
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    top flange
    position monitoring
    without
    pressure range
    high pressure
    clamping stroke [mm]
    22
    extended piston rod
    without
    max. clamping force [kN]
    16.5
    swing mechanism
    reinforced
    overload protection device
    without
    query of
    without
    swing angle [°]
    60
    swing direction
    cw
    swing stroke [mm]
    13
    total stroke [mm]
    35
    wiper material
    metal
    clamping arm seat
    cone 1:10
    Item no.
    1895323VMH35
    functioning
    double acting
    piston diameter [mm]
    40
    rod diameter [mm]
    32
    max. pulling force [kN]
    22.6
    max. operating pressure [bar]
    500
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    top flange
    position monitoring
    accessory: electrical or pneumatic
    pressure range
    high pressure
    clamping stroke [mm]
    22
    extended piston rod
    with
    max. clamping force [kN]
    16.5
    swing mechanism
    reinforced
    overload protection device
    without
    query of
    piston: clamped and unclamped
    swing angle [°]
    60
    swing direction
    cw
    swing stroke [mm]
    13
    total stroke [mm]
    35
    wiper material
    FKM
    clamping arm seat
    cone 1:10
    Item no.
    1895323VMM35
    functioning
    double acting
    piston diameter [mm]
    40
    rod diameter [mm]
    32
    max. pulling force [kN]
    22.6
    max. operating pressure [bar]
    500
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    top flange
    position monitoring
    accessory: electrical or pneumatic
    pressure range
    high pressure
    clamping stroke [mm]
    22
    extended piston rod
    with
    max. clamping force [kN]
    16.5
    swing mechanism
    reinforced
    overload protection device
    without
    query of
    piston: clamped and unclamped
    swing angle [°]
    60
    swing direction
    cw
    swing stroke [mm]
    13
    total stroke [mm]
    35
    wiper material
    metal
    clamping arm seat
    cone 1:10
    Item no.
    1895333VDH35
    functioning
    double acting
    piston diameter [mm]
    40
    rod diameter [mm]
    32
    max. pulling force [kN]
    22.6
    max. operating pressure [bar]
    500
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    top flange
    position monitoring
    without
    pressure range
    high pressure
    clamping stroke [mm]
    22
    extended piston rod
    without
    max. clamping force [kN]
    16.5
    swing mechanism
    reinforced
    overload protection device
    without
    query of
    without
    swing angle [°]
    45
    swing direction
    cw
    swing stroke [mm]
    13
    total stroke [mm]
    35
    wiper material
    FKM
    clamping arm seat
    cone 1:10
    Item no.
    1895333VDM35
    functioning
    double acting
    piston diameter [mm]
    40
    rod diameter [mm]
    32
    max. pulling force [kN]
    22.6
    max. operating pressure [bar]
    500
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    top flange
    position monitoring
    without
    pressure range
    high pressure
    clamping stroke [mm]
    22
    extended piston rod
    without
    max. clamping force [kN]
    16.5
    swing mechanism
    reinforced
    overload protection device
    without
    query of
    without
    swing angle [°]
    45
    swing direction
    cw
    swing stroke [mm]
    13
    total stroke [mm]
    35
    wiper material
    metal
    clamping arm seat
    cone 1:10
    Accessories (12)
    Item no. CAD data Description
    Item no.
    3000347
    CAD data
    Description
    O-ring 10 x 2 mm, NBR as per data sheet B1.5091
    Item no.
    3610264
    CAD data
    Description
    Screw plug G1/4 SW 19 x 8 mm high max. 500 bar, as per data sheet F9.300
    Error loading CAD data. Please check your internet connection and try again.
    Please note: Our CAD data are generally simplified data and primarily reflect the outer contour and connections of the product (see also Terms of use). Please always refer to the relevant catalogue sheet for the exact dimensions with tolerances, in particular the information on mounting holes or attachments such as special clamps.