• My requests (0)
      You do not currently have any products added to your request.
      All requests
    Search
    All results
    Contact
    (636) 386-8022 Call now
    [email protected] Contact now
    Series
    D8.600

    Hydro-Pneumatic Pumps

    max. flow rate 1.5 l/min
    max. operating pressure 500 bar
    Hydro-Pneumatic Pumps
    Downloads
    Catalogue sheet
    USESFR
    Operating instructions
    Information Series
    Description
    D 8.600 Hydro-pneumatic pumps

    Application
    The hydraulic clamping pump is particularly suitable for small to medium-sized clamping and assembly fixtures with single-acting cylinders, which operate primarily by intermittence (pressure build up and pressure holding).

    Description
    The tandem plunger pump is built into the oil reservoir in a space-saving manner. It operates with oscillating movements and automatic stroke reversing control by a pilot-operated 4/2 directional control valve. The stroke frequency and thereby the flow rate depend on air pressure and hydraulic counter pressure.

    Control variants
    Manually-operated 3/2 directional control valve
    This valve is equipped with a turning handle for direct operation at the power unit.

    Pneumatically-operated 3/2 directional control valve
    This valve is mounted on the power unit allowing for pneumatic remote control, which, however, requires an additional pilot valve (accessory). According to the length of the pneumatic piping between both valves, there is a longer or shorter time delay for the clamping and unclamping operation.

    Without valve as pressure generator
    For external valve controls (P and R ports only).
    The pump unit maintains constant the adjusted pressure.

    With attached valve control
    For single and double-acting cylinders.

    Delivery
    The power units are delivered complete and ready for connection. On the pneumatic side there is a service unit with pressure reducer and filter. An additional pressure relief valve prevents increase of pressure over 4.8 bar, and thus operating pressures over 500 bar on the hydraulic side. With valve control fitted, the customer must ensure that the valves are controlled.

    Products (4)
    type
    single acting (4)
    max. operating pressure [bar]
    500 (4)
    operation
    max. flow rate [l/min]
    1.5 (4)
    oil volume of the reservoir [l]
    4 (4)
    usable oil volume [l]
    1.8 (4)
    Item no. CAD datatypemax. operating pressure [bar]operationmax. flow rate [l/min]
    Item no.
    8600110
    CAD data
    /
    type
    single acting
    max. operating pressure [bar]
    500
    operation
    with manual valve
    max. flow rate [l/min]
    1.5
    Properties
    Item no.
    8600111
    CAD data
    /
    type
    single acting
    max. operating pressure [bar]
    500
    operation
    with pneumatic valve
    max. flow rate [l/min]
    1.5
    Properties
    Item no.
    8600112
    CAD data
    /
    type
    single acting
    max. operating pressure [bar]
    500
    operation
    without valve
    max. flow rate [l/min]
    1.5
    Properties
    Item no.
    8600113
    CAD data
    /
    type
    single acting
    max. operating pressure [bar]
    500
    operation
    as basic power unit
    max. flow rate [l/min]
    1.5
    Properties
    Item no.
    8600110
    type
    single acting
    max. operating pressure [bar]
    500
    operation
    with manual valve
    max. flow rate [l/min]
    1.5
    oil volume of the reservoir [l]
    4
    usable oil volume [l]
    1.8
    Item no.
    8600111
    type
    single acting
    max. operating pressure [bar]
    500
    operation
    with pneumatic valve
    max. flow rate [l/min]
    1.5
    oil volume of the reservoir [l]
    4
    usable oil volume [l]
    1.8
    Item no.
    8600112
    type
    single acting
    max. operating pressure [bar]
    500
    operation
    without valve
    max. flow rate [l/min]
    1.5
    oil volume of the reservoir [l]
    4
    usable oil volume [l]
    1.8
    Item no.
    8600113
    type
    single acting
    max. operating pressure [bar]
    500
    operation
    as basic power unit
    max. flow rate [l/min]
    1.5
    oil volume of the reservoir [l]
    4
    usable oil volume [l]
    1.8
    Accessories (8)
    Item no. CAD data Description
    Item no.
    0353217
    CAD data
    /
    Description
    Handle as per data sheet D8.600
    Item no.
    0353714
    CAD data
    /
    Description
    Protection cover as per data sheet D8.600
    Item no.
    0381206
    CAD data
    /
    Description
    Foot valve with catch including cover as per data sheet D8.600
    Item no.
    3812005
    CAD data
    /
    Description
    Hand lever valve with catch as per data sheet D8.600
    Item no.
    3887015
    CAD data
    /
    Description
    Silencer - size 1/8 as per data sheet D8.600
    Item no.
    3890059
    CAD data
    /
    Description
    Air hose ND 6 as per data sheet D8.600
    Item no.
    3890071
    CAD data
    /
    Description
    Screwed socket G1/4 as per data sheet D8.600
    Item no.
    3890076
    CAD data
    /
    Description
    Hose clamp as per data sheet D8.600
    Error loading CAD data. Please check your internet connection and try again.
    Please note: Our CAD data are generally simplified data and primarily reflect the outer contour and connections of the product (see also Terms of use). Please always refer to the relevant catalogue sheet for the exact dimensions with tolerances, in particular the information on mounting holes or attachments such as special clamps.