• My requests (0)
      You do not currently have any products added to your request.
      All requests
    Search
    All results
    Contact
    +43 5522 37 400 - 0 Call now
    [email protected] Contact now
    Series
    HILMA.KNC

    Vice system HILMA.KNC

    clamping against the fixed jaw
    jaw widths 100 | 125 | 160 mm
    Vice system HILMA.KNC
    Downloads
    Catalogue sheet
    EN
    Operating instructions
    Information Series

     

    Further information
    HILMA.KNC - www.stark-roemheld.com/hilma-knc

    Description
    Clamping system HILMA.KNC 
    • clamping against the fixed jaw
    • mechanically / hydraulically operated
    • jaw widths 100, 125, 160 mm

    For exacting demands on clamping quality
    The mechanical-hydraulic force transmission and the lead screw are integrated into the slide body and are fully encapsulated. Easy, user-friendly manual clamping using the crank handle. 6-stage clamping force selection and angle drive are available as accessories which may be retrofitted. The steel base with minimum deformation equipped with hardened and ground guideways as well as the linear guide with almost no play of the slide guarantee maximum precision. The quick adjustment of the clamping ranges is made with socket pins, the use of a gas pressure spring relieves the load on the clamping slide. HILMA.KNC Universal for horizontal, vertical and lateral arrangement, with longitudinal and crosswise keyways 20 H7, reference keyway 20 H7 on the face, threaded mounting holes in the base and gas pressure spring for load relief of the slide in vertical arrangement. For vertical or lateral applications, the use of support angles or basic bodies is recommended.

    Special benefits

    • very stable base with hardened and ground guideways
    • universal use, can be clamped horizontally, vertically and laterally
    • easy and quick adjustment of the jaw opening using socket pins
    • wide range of jaws
    Clamping system HILMA.KNC
    Clamping system HILMA.KNC
    Products (6)
    type
    operation
    with crank handle (6)
    max. clamping force [kN]
    clamping principle
    fixed jaw (6)
    clamping system
    single clamping system (6)
    jaw width [mm]
    overall length L [mm]
    height H [mm]
    max. jaw opening [mm]
    max. jaw opening with step jaw inserts [mm]
    clamping jaws
    reversible step jaws (6)
    longitudinal and crosswise keyways
    with (6)
    clamping force display
    without (6)
    opening stroke limitation
    without (6)
    Item no. CAD datatypeoperationmax. clamping force [kN]clamping principle
    Item no.
    931520131
    CAD data
    type
    HILMA.KNC Standard
    operation
    with crank handle
    max. clamping force [kN]
    25
    clamping principle
    fixed jaw
    Properties
    Item no.
    931520141
    CAD data
    type
    HILMA.KNC Universal
    operation
    with crank handle
    max. clamping force [kN]
    25
    clamping principle
    fixed jaw
    Properties
    Item no.
    931530131
    CAD data
    type
    HILMA.KNC Standard
    operation
    with crank handle
    max. clamping force [kN]
    40
    clamping principle
    fixed jaw
    Properties
    Item no.
    931530141
    CAD data
    type
    HILMA.KNC Universal
    operation
    with crank handle
    max. clamping force [kN]
    40
    clamping principle
    fixed jaw
    Properties
    Item no.
    931540131
    CAD data
    type
    HILMA.KNC Standard
    operation
    with crank handle
    max. clamping force [kN]
    50
    clamping principle
    fixed jaw
    Properties
    Item no.
    931540141
    CAD data
    type
    HILMA.KNC Universal
    operation
    with crank handle
    max. clamping force [kN]
    50
    clamping principle
    fixed jaw
    Properties
    Item no.
    931520131
    type
    HILMA.KNC Standard
    operation
    with crank handle
    max. clamping force [kN]
    25
    clamping principle
    fixed jaw
    clamping system
    single clamping system
    jaw width [mm]
    100
    overall length L [mm]
    300
    height H [mm]
    90
    max. jaw opening [mm]
    140
    max. jaw opening with step jaw inserts [mm]
    230
    clamping jaws
    reversible step jaws
    longitudinal and crosswise keyways
    with
    clamping force display
    without
    opening stroke limitation
    without
    Item no.
    931520141
    type
    HILMA.KNC Universal
    operation
    with crank handle
    max. clamping force [kN]
    25
    clamping principle
    fixed jaw
    clamping system
    single clamping system
    jaw width [mm]
    100
    overall length L [mm]
    300
    height H [mm]
    90
    max. jaw opening [mm]
    140
    max. jaw opening with step jaw inserts [mm]
    230
    clamping jaws
    reversible step jaws
    longitudinal and crosswise keyways
    with
    clamping force display
    without
    opening stroke limitation
    without
    Item no.
    931530131
    type
    HILMA.KNC Standard
    operation
    with crank handle
    max. clamping force [kN]
    40
    clamping principle
    fixed jaw
    clamping system
    single clamping system
    jaw width [mm]
    125
    overall length L [mm]
    440
    height H [mm]
    100
    max. jaw opening [mm]
    240
    max. jaw opening with step jaw inserts [mm]
    354
    clamping jaws
    reversible step jaws
    longitudinal and crosswise keyways
    with
    clamping force display
    without
    opening stroke limitation
    without
    Item no.
    931530141
    type
    HILMA.KNC Universal
    operation
    with crank handle
    max. clamping force [kN]
    40
    clamping principle
    fixed jaw
    clamping system
    single clamping system
    jaw width [mm]
    125
    overall length L [mm]
    440
    height H [mm]
    100
    max. jaw opening [mm]
    240
    max. jaw opening with step jaw inserts [mm]
    354
    clamping jaws
    reversible step jaws
    longitudinal and crosswise keyways
    with
    clamping force display
    without
    opening stroke limitation
    without
    Item no.
    931540131
    type
    HILMA.KNC Standard
    operation
    with crank handle
    max. clamping force [kN]
    50
    clamping principle
    fixed jaw
    clamping system
    single clamping system
    jaw width [mm]
    160
    overall length L [mm]
    540
    height H [mm]
    115
    max. jaw opening [mm]
    300
    max. jaw opening with step jaw inserts [mm]
    436
    clamping jaws
    reversible step jaws
    longitudinal and crosswise keyways
    with
    clamping force display
    without
    opening stroke limitation
    without
    Item no.
    931540141
    type
    HILMA.KNC Universal
    operation
    with crank handle
    max. clamping force [kN]
    50
    clamping principle
    fixed jaw
    clamping system
    single clamping system
    jaw width [mm]
    160
    overall length L [mm]
    540
    height H [mm]
    115
    max. jaw opening [mm]
    300
    max. jaw opening with step jaw inserts [mm]
    436
    clamping jaws
    reversible step jaws
    longitudinal and crosswise keyways
    with
    clamping force display
    without
    opening stroke limitation
    without
    Accessories (71)
    Item no. CAD data Description
    Item no.
    931530529
    CAD data
    /
    Description
    Locking device for HILMA.KNC angle drive for KNC 125/ KNC 160 as per data sheet WS 1.3150
    Item no.
    931536901
    CAD data
    /
    Description
    Block jaw, hardened - fixed jaw jaw width 125 mm 1st side hard-metal coated 2nd side ground to be smooth, with hole pattern as per data sheet WS 1.3150
    Item no.
    931536902
    CAD data
    /
    Description
    Block jaw, hardened - movable jaw jaw width 125 mm 1st side hard-metal coated 2nd side ground to be smooth, with hole pattern as per data sheet WS 1.3150
    Item no.
    931536903
    CAD data
    /
    Description
    Reversible step jaw - fixed jaw jaw width 125 mm 1st side with precise step accommodation 2nd side with hole pattern as per data sheet WS 1.3150
    Item no.
    931536904
    CAD data
    /
    Description
    Reversible step jaw - movable jaw jaw width 125 mm 1st side with precise step accommodation 2nd side with hole pattern as per data sheet WS 1.3150
    Item no.
    931536905
    CAD data
    /
    Description
    Block jaw, soft - fixed jaw material 42 CrMo 4 jaw width 125 mm as per data sheet WS 1.3150
    Item no.
    931536906
    CAD data
    /
    Description
    Block jaw, soft - movable jaw material 42 CrMo 4 jaw width 125 mm as per data sheet WS 1.3150
    Item no.
    931536908
    CAD data
    /
    Description
    Pendulum jaw - fixed jaw jaw width 125 mm as per data sheet WS 1.3150
    Item no.
    931536909
    CAD data
    /
    Description
    SlimFlex clamping jaw - fixed jaw with scale for rough adjustment jaw width 125 mm as per data sheet WS 1.3150
    Item no.
    931536910
    CAD data
    /
    Description
    SlimFlex clamping jaw - movable jaw with scale for rough adjustment jaw width 125 mm as per data sheet WS 1.3150
    Application examples
    Mechanical-hydraulic machine vise HILMA.KNC 125

    The mechanical-hydraulic machine vise HILMA.KNC 125 with a jaw width of 125 millimetres is used where flexibility and highest precision are required. The HILMA.KNC 125 has a clamping force of 40 kN and a jaw opening from 0 to 354 millimetres using standard reversible jaws. Quick adjustment of the clamping range using socket pins. Alternatively numerous other standard clamping jaws can be used. Machine vises of the HILMA.KNC series can be used – as shown - on vertical machining centres as well as on horizontal machining centres. Also the use on 5-axis machining centres with extra high 

    Mechanical-hydraulic machine vise HILMA.KNC 125
    Mechanical-hydraulic machine vise HILMA.KNC 125
    Use with QIS jaws
    Use with QIS jaws
    SlimFlex jaws with movable inserts
    SlimFlex jaws with movable inserts
    Pendulum jaw for clearing of angle errors
    Pendulum jaw for clearing of angle errors
    Stepped jaws for small workpieces
    Stepped jaws for small workpieces
    HILMA Machine vise HILMA.KNC 125
    Error loading CAD data. Please check your internet connection and try again.
    Please note: Our CAD data are generally simplified data and primarily reflect the outer contour and connections of the product (see also Terms of use). Please always refer to the relevant catalogue sheet for the exact dimensions with tolerances, in particular the information on mounting holes or attachments such as special clamps.