• My requests (0)
      You do not currently have any products added to your request.
      All requests
    Search
    All results
    Contact
    (636) 386-8022 Call now
    [email protected] Contact now
    Series
    B1.854

    Swing Clamps with Sturdy Swing Mechanism

    Bottom flange, position monitoring optional
    double acting, max. operating pressure 350 bar
    Swing Clamps with Sturdy Swing Mechanism
    Downloads
    Catalogue sheet
    No catalog sheets available.
    Operating instructions
    Request product
    Check Pricing and Availability
    Go to Carrlane.com
    Information Series
    Beschreibung
    B 1.854 Swing Clamps with Sturdy Swing Mechanism

    Hydraulic swing clamps are used for clamping of workpieces, when it is essential to keep the clamping area free of straps and clamping components for unrestricted workpiece loading and unloading.
    This series obtains very high clamping forces already at 120 bar and can directly be connected to the low-pressure hydraulics of the machine tool.
    An additional power unit for power workholding is no longer necessary.
    With the sturdy swing mechanism and the optional position monitoring these swing clamps are particularly suitable for:

    • Automatic manufacturing systems with very short cycle times
    • Clamping fixtures with workpiece loading by handling systems
    • Transfer lines
    • Test systems for motors, gears and axes
    • Assembly lines
    • Special machine tools

     

    The hydraulic swing clamp is a pull-type cylinder where a part of the total stroke is used to swing the piston.
    Due to the sturdy swing mechanism the angle position of the clamping arm remains the same after a slight collision with the workpiece during loading and unloading or during clamping.
    The angle position of the clamping arm is fixed with a dowel pin.
    The FKM wiper at the piston rod can be protected against coarse and hot swarf by an optionally available metallic wiper.
    The version with extended switch rod is provided for mounting of pneumatic or electrical position monitorings (accessory).

    Products (696)
    body design
    bottom flange (696)
    clamping arm seat
    cone 1:10 (696)
    clamping stroke [mm]
    swing stroke [mm]
    total stroke [mm]
    swing angle [°]
    swing direction
    functioning
    double acting (696)
    piston diameter [mm]
    rod diameter [mm]
    max. pulling force [kN]
    max. operating pressure [bar]
    350 (696)
    seals
    NBR (696)
    hydraulic ports
    pipe thread and manifold connection with O-ring (696)
    position monitoring
    pressure range
    high pressure (696)
    extended piston rod
    max. clamping force [kN]
    swing mechanism
    sturdy (696)
    overload protection device
    without (696)
    query of
    wiper material
    Item no. CAD datafunctioningpiston diameter [mm]rod diameter [mm]max. pulling force [kN]
    Item no.
    1846N025R36
    CAD data
    /
    functioning
    double acting
    piston diameter [mm]
    45
    rod diameter [mm]
    32
    max. pulling force [kN]
    27.5
    Properties
    Item no.
    1846N025R36M
    CAD data
    /
    functioning
    double acting
    piston diameter [mm]
    45
    rod diameter [mm]
    32
    max. pulling force [kN]
    27.5
    Properties
    Item no.
    1846N030L36
    CAD data
    /
    functioning
    double acting
    piston diameter [mm]
    45
    rod diameter [mm]
    32
    max. pulling force [kN]
    27.5
    Properties
    Item no.
    1846N030L36M
    CAD data
    /
    functioning
    double acting
    piston diameter [mm]
    45
    rod diameter [mm]
    32
    max. pulling force [kN]
    27.5
    Properties
    Item no.
    1846N030R36
    CAD data
    /
    functioning
    double acting
    piston diameter [mm]
    45
    rod diameter [mm]
    32
    max. pulling force [kN]
    27.5
    Properties
    Item no.
    1846N030R36M
    CAD data
    /
    functioning
    double acting
    piston diameter [mm]
    45
    rod diameter [mm]
    32
    max. pulling force [kN]
    27.5
    Properties
    Item no.
    1846N035L36
    CAD data
    /
    functioning
    double acting
    piston diameter [mm]
    45
    rod diameter [mm]
    32
    max. pulling force [kN]
    27.5
    Properties
    Item no.
    1846N035L36M
    CAD data
    /
    functioning
    double acting
    piston diameter [mm]
    45
    rod diameter [mm]
    32
    max. pulling force [kN]
    27.5
    Properties
    Item no.
    1846N035R36
    CAD data
    /
    functioning
    double acting
    piston diameter [mm]
    45
    rod diameter [mm]
    32
    max. pulling force [kN]
    27.5
    Properties
    Item no.
    1846N035R36M
    CAD data
    /
    functioning
    double acting
    piston diameter [mm]
    45
    rod diameter [mm]
    32
    max. pulling force [kN]
    27.5
    Properties
    Item no.
    1846N025R36
    functioning
    double acting
    piston diameter [mm]
    45
    rod diameter [mm]
    32
    max. pulling force [kN]
    27.5
    max. operating pressure [bar]
    350
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    bottom flange
    position monitoring
    integrated - pneumatic
    pressure range
    high pressure
    clamping stroke [mm]
    15
    extended piston rod
    without
    max. clamping force [kN]
    22
    swing mechanism
    sturdy
    overload protection device
    without
    query of
    piston: unclamped
    swing angle [°]
    25
    swing direction
    cw
    swing stroke [mm]
    11.12
    total stroke [mm]
    26.12
    wiper material
    FKM
    clamping arm seat
    cone 1:10
    Item no.
    1846N025R36M
    functioning
    double acting
    piston diameter [mm]
    45
    rod diameter [mm]
    32
    max. pulling force [kN]
    27.5
    max. operating pressure [bar]
    350
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    bottom flange
    position monitoring
    integrated - pneumatic
    pressure range
    high pressure
    clamping stroke [mm]
    15
    extended piston rod
    without
    max. clamping force [kN]
    22
    swing mechanism
    sturdy
    overload protection device
    without
    query of
    piston: unclamped
    swing angle [°]
    25
    swing direction
    cw
    swing stroke [mm]
    11.12
    total stroke [mm]
    26.12
    wiper material
    metal
    clamping arm seat
    cone 1:10
    Item no.
    1846N030L36
    functioning
    double acting
    piston diameter [mm]
    45
    rod diameter [mm]
    32
    max. pulling force [kN]
    27.5
    max. operating pressure [bar]
    350
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    bottom flange
    position monitoring
    integrated - pneumatic
    pressure range
    high pressure
    clamping stroke [mm]
    15
    extended piston rod
    without
    max. clamping force [kN]
    22
    swing mechanism
    sturdy
    overload protection device
    without
    query of
    piston: unclamped
    swing angle [°]
    30
    swing direction
    ccw
    swing stroke [mm]
    11.88
    total stroke [mm]
    26.88
    wiper material
    FKM
    clamping arm seat
    cone 1:10
    Item no.
    1846N030L36M
    functioning
    double acting
    piston diameter [mm]
    45
    rod diameter [mm]
    32
    max. pulling force [kN]
    27.5
    max. operating pressure [bar]
    350
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    bottom flange
    position monitoring
    integrated - pneumatic
    pressure range
    high pressure
    clamping stroke [mm]
    15
    extended piston rod
    without
    max. clamping force [kN]
    22
    swing mechanism
    sturdy
    overload protection device
    without
    query of
    piston: unclamped
    swing angle [°]
    30
    swing direction
    ccw
    swing stroke [mm]
    11.88
    total stroke [mm]
    26.88
    wiper material
    metal
    clamping arm seat
    cone 1:10
    Item no.
    1846N030R36
    functioning
    double acting
    piston diameter [mm]
    45
    rod diameter [mm]
    32
    max. pulling force [kN]
    27.5
    max. operating pressure [bar]
    350
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    bottom flange
    position monitoring
    integrated - pneumatic
    pressure range
    high pressure
    clamping stroke [mm]
    15
    extended piston rod
    without
    max. clamping force [kN]
    22
    swing mechanism
    sturdy
    overload protection device
    without
    query of
    piston: unclamped
    swing angle [°]
    30
    swing direction
    cw
    swing stroke [mm]
    11.88
    total stroke [mm]
    26.88
    wiper material
    FKM
    clamping arm seat
    cone 1:10
    Item no.
    1846N030R36M
    functioning
    double acting
    piston diameter [mm]
    45
    rod diameter [mm]
    32
    max. pulling force [kN]
    27.5
    max. operating pressure [bar]
    350
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    bottom flange
    position monitoring
    integrated - pneumatic
    pressure range
    high pressure
    clamping stroke [mm]
    15
    extended piston rod
    without
    max. clamping force [kN]
    22
    swing mechanism
    sturdy
    overload protection device
    without
    query of
    piston: unclamped
    swing angle [°]
    30
    swing direction
    cw
    swing stroke [mm]
    11.88
    total stroke [mm]
    26.88
    wiper material
    metal
    clamping arm seat
    cone 1:10
    Item no.
    1846N035L36
    functioning
    double acting
    piston diameter [mm]
    45
    rod diameter [mm]
    32
    max. pulling force [kN]
    27.5
    max. operating pressure [bar]
    350
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    bottom flange
    position monitoring
    integrated - pneumatic
    pressure range
    high pressure
    clamping stroke [mm]
    15
    extended piston rod
    without
    max. clamping force [kN]
    22
    swing mechanism
    sturdy
    overload protection device
    without
    query of
    piston: unclamped
    swing angle [°]
    35
    swing direction
    ccw
    swing stroke [mm]
    12.64
    total stroke [mm]
    27.64
    wiper material
    FKM
    clamping arm seat
    cone 1:10
    Item no.
    1846N035L36M
    functioning
    double acting
    piston diameter [mm]
    45
    rod diameter [mm]
    32
    max. pulling force [kN]
    27.5
    max. operating pressure [bar]
    350
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    bottom flange
    position monitoring
    integrated - pneumatic
    pressure range
    high pressure
    clamping stroke [mm]
    15
    extended piston rod
    without
    max. clamping force [kN]
    22
    swing mechanism
    sturdy
    overload protection device
    without
    query of
    piston: unclamped
    swing angle [°]
    35
    swing direction
    ccw
    swing stroke [mm]
    12.64
    total stroke [mm]
    27.64
    wiper material
    metal
    clamping arm seat
    cone 1:10
    Item no.
    1846N035R36
    functioning
    double acting
    piston diameter [mm]
    45
    rod diameter [mm]
    32
    max. pulling force [kN]
    27.5
    max. operating pressure [bar]
    350
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    bottom flange
    position monitoring
    integrated - pneumatic
    pressure range
    high pressure
    clamping stroke [mm]
    15
    extended piston rod
    without
    max. clamping force [kN]
    22
    swing mechanism
    sturdy
    overload protection device
    without
    query of
    piston: unclamped
    swing angle [°]
    35
    swing direction
    cw
    swing stroke [mm]
    12.64
    total stroke [mm]
    27.64
    wiper material
    FKM
    clamping arm seat
    cone 1:10
    Item no.
    1846N035R36M
    functioning
    double acting
    piston diameter [mm]
    45
    rod diameter [mm]
    32
    max. pulling force [kN]
    27.5
    max. operating pressure [bar]
    350
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    bottom flange
    position monitoring
    integrated - pneumatic
    pressure range
    high pressure
    clamping stroke [mm]
    15
    extended piston rod
    without
    max. clamping force [kN]
    22
    swing mechanism
    sturdy
    overload protection device
    without
    query of
    piston: unclamped
    swing angle [°]
    35
    swing direction
    cw
    swing stroke [mm]
    12.64
    total stroke [mm]
    27.64
    wiper material
    metal
    clamping arm seat
    cone 1:10
    Accessories (47)
    Item no. CAD data Description
    Item no.
    0184006
    CAD data
    Description
    Angle bracket, complete for series 1843 as per data sheet B1.854
    Item no.
    0184007
    CAD data
    Description
    Angle bracket, complete for series 1844 as per data sheet B1.854
    Item no.
    0184008
    CAD data
    Description
    Angle bracket, complete for series 1846 as per data sheet B1.854
    Item no.
    0341100
    CAD data
    /
    Description
    Metallic wiper, complete for rod diameter 32 mm as per data sheet B1.852
    Item no.
    0341104
    CAD data
    /
    Description
    Metallic wiper, complete for rod diameter 16 mm as per data sheet B1.852
    Item no.
    0341105
    CAD data
    /
    Description
    Metallic wiper, complete for rod diameter 25 mm as per data sheet B1.852
    Item no.
    0341107
    CAD data
    Description
    Metallic wiper, complete for rod diameter 20 mm as per data sheet B1.852
    Item no.
    0353320
    CAD data
    Description
    Locking flange with pneumatic valve switching range 2 - 9 mm for size 1843, type L/M/N as per data sheet B1.854
    Item no.
    0353321
    CAD data
    Description
    Locking flange with pneumatic valve switching range 2 - 9 mm for size 1844, type L/M/N as per data sheet B1.854
    Item no.
    0353322
    CAD data
    Description
    Locking flange with pneumatic valve switching range 2 - 9 mm for size 1845, type L/M/N as per data sheet B1.854
    Error loading CAD data. Please check your internet connection and try again.
    Please note: Our CAD data are generally simplified data and primarily reflect the outer contour and connections of the product (see also Terms of use). Please always refer to the relevant catalogue sheet for the exact dimensions with tolerances, in particular the information on mounting holes or attachments such as special clamps.