• My requests (0)
      You do not currently have any products added to your request.
      All requests
    Search
    All results
    Contact
    (636) 386-8022 Call now
    [email protected] Contact now
    Series
    B1.8806

    Swing Clamp without Swing Stroke

    Top flange, reinforced swing mechanism
    position monitoring optional
    double acting, max. operating pressure 350 bar
    Swing Clamp without Swing Stroke
    Downloads
    Catalogue sheet
    USESFR
    Operating instructions
    Information Series
    Description
    B 1.8806 Swing clamps without swing stroke

    Hydraulic swing clamps are used for clamping of workpieces, when it is essential to keep the clamping area free of straps and clamping components for unrestricted workpiece loading and unloading.
    Using this version without swing stroke, the clamping arm swings in one level and thereby allows the clamping of workpieces in recesses that are only insignificantly higher than the clamping arm.

    The swing clamp without swing stroke is a double-acting pull-type cylinder where a part of the piston stroke is used to swing the piston rod without axial stroke.

     

    Clamping

    1. The piston rod is rotated together with the clamping arm without axial stroke (swing stroke) in the desired direction.
    2. After swinging in the clamping arm above the clamping point, the linear clamping stroke will be effected.

    Unclamping

    1. For the linear return stroke, the clamping arm is lifted from the clamping point.
    2. The piston rod swings the clamping arm without axial stroke back to the off-position.
    swing clamps without swing stroke B1.8806
    swing clamps without swing stroke B1.8806
    Products (24)
    body design
    top flange (24)
    clamping arm seat
    cone 1:10 (24)
    clamping stroke [mm]
    swing stroke [mm]
    0 (24)
    total stroke [mm]
    swing angle [°]
    90 (24)
    swing direction
    functioning
    double acting without swing stroke (24)
    piston diameter [mm]
    rod diameter [mm]
    max. pulling force [kN]
    max. operating pressure [bar]
    350 (24)
    seals
    NBR (24)
    hydraulic ports
    pipe thread and manifold connection with O-ring (24)
    position monitoring
    pressure range
    high pressure (24)
    extended piston rod
    max. clamping force [kN]
    swing mechanism
    reinforced (24)
    overload protection device
    without (24)
    query of
    wiper material
    Item no. CAD datafunctioningpiston diameter [mm]rod diameter [mm]max. pulling force [kN]
    Item no.
    1893N90L12DH
    CAD data
    functioning
    double acting without swing stroke
    piston diameter [mm]
    25
    rod diameter [mm]
    20
    max. pulling force [kN]
    6.1
    Properties
    Item no.
    1893N90L12DM
    CAD data
    functioning
    double acting without swing stroke
    piston diameter [mm]
    25
    rod diameter [mm]
    20
    max. pulling force [kN]
    6.1
    Properties
    Item no.
    1893N90L12MH
    CAD data
    functioning
    double acting without swing stroke
    piston diameter [mm]
    25
    rod diameter [mm]
    20
    max. pulling force [kN]
    6.1
    Properties
    Item no.
    1893N90L12MM
    CAD data
    functioning
    double acting without swing stroke
    piston diameter [mm]
    25
    rod diameter [mm]
    20
    max. pulling force [kN]
    6.1
    Properties
    Item no.
    1893N90R12DH
    CAD data
    functioning
    double acting without swing stroke
    piston diameter [mm]
    25
    rod diameter [mm]
    20
    max. pulling force [kN]
    6.1
    Properties
    Item no.
    1893N90R12DM
    CAD data
    functioning
    double acting without swing stroke
    piston diameter [mm]
    25
    rod diameter [mm]
    20
    max. pulling force [kN]
    6.1
    Properties
    Item no.
    1893N90R12MH
    CAD data
    functioning
    double acting without swing stroke
    piston diameter [mm]
    25
    rod diameter [mm]
    20
    max. pulling force [kN]
    6.1
    Properties
    Item no.
    1893N90R12MM
    CAD data
    functioning
    double acting without swing stroke
    piston diameter [mm]
    25
    rod diameter [mm]
    20
    max. pulling force [kN]
    6.1
    Properties
    Item no.
    1895N90L16DH
    CAD data
    functioning
    double acting without swing stroke
    piston diameter [mm]
    40
    rod diameter [mm]
    32
    max. pulling force [kN]
    15.8
    Properties
    Item no.
    1895N90L16DM
    CAD data
    functioning
    double acting without swing stroke
    piston diameter [mm]
    40
    rod diameter [mm]
    32
    max. pulling force [kN]
    15.8
    Properties
    Item no.
    1893N90L12DH
    functioning
    double acting without swing stroke
    piston diameter [mm]
    25
    rod diameter [mm]
    20
    max. pulling force [kN]
    6.1
    max. operating pressure [bar]
    350
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    top flange
    position monitoring
    without
    pressure range
    high pressure
    clamping stroke [mm]
    12
    extended piston rod
    without
    max. clamping force [kN]
    4.9
    swing mechanism
    reinforced
    overload protection device
    without
    query of
    without
    swing angle [°]
    90
    swing direction
    ccw
    swing stroke [mm]
    total stroke [mm]
    12
    wiper material
    FKM
    clamping arm seat
    cone 1:10
    Item no.
    1893N90L12DM
    functioning
    double acting without swing stroke
    piston diameter [mm]
    25
    rod diameter [mm]
    20
    max. pulling force [kN]
    6.1
    max. operating pressure [bar]
    350
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    top flange
    position monitoring
    without
    pressure range
    high pressure
    clamping stroke [mm]
    12
    extended piston rod
    without
    max. clamping force [kN]
    4.9
    swing mechanism
    reinforced
    overload protection device
    without
    query of
    without
    swing angle [°]
    90
    swing direction
    ccw
    swing stroke [mm]
    total stroke [mm]
    12
    wiper material
    metal
    clamping arm seat
    cone 1:10
    Item no.
    1893N90L12MH
    functioning
    double acting without swing stroke
    piston diameter [mm]
    25
    rod diameter [mm]
    20
    max. pulling force [kN]
    6.1
    max. operating pressure [bar]
    350
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    top flange
    position monitoring
    accessory: electrical or pneumatic
    pressure range
    high pressure
    clamping stroke [mm]
    12
    extended piston rod
    with
    max. clamping force [kN]
    4.9
    swing mechanism
    reinforced
    overload protection device
    without
    query of
    piston: clamped and unclamped
    swing angle [°]
    90
    swing direction
    ccw
    swing stroke [mm]
    total stroke [mm]
    12
    wiper material
    FKM
    clamping arm seat
    cone 1:10
    Item no.
    1893N90L12MM
    functioning
    double acting without swing stroke
    piston diameter [mm]
    25
    rod diameter [mm]
    20
    max. pulling force [kN]
    6.1
    max. operating pressure [bar]
    350
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    top flange
    position monitoring
    accessory: electrical or pneumatic
    pressure range
    high pressure
    clamping stroke [mm]
    12
    extended piston rod
    with
    max. clamping force [kN]
    4.9
    swing mechanism
    reinforced
    overload protection device
    without
    query of
    piston: clamped and unclamped
    swing angle [°]
    90
    swing direction
    ccw
    swing stroke [mm]
    total stroke [mm]
    12
    wiper material
    metal
    clamping arm seat
    cone 1:10
    Item no.
    1893N90R12DH
    functioning
    double acting without swing stroke
    piston diameter [mm]
    25
    rod diameter [mm]
    20
    max. pulling force [kN]
    6.1
    max. operating pressure [bar]
    350
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    top flange
    position monitoring
    without
    pressure range
    high pressure
    clamping stroke [mm]
    12
    extended piston rod
    without
    max. clamping force [kN]
    4.9
    swing mechanism
    reinforced
    overload protection device
    without
    query of
    without
    swing angle [°]
    90
    swing direction
    cw
    swing stroke [mm]
    total stroke [mm]
    12
    wiper material
    FKM
    clamping arm seat
    cone 1:10
    Item no.
    1893N90R12DM
    functioning
    double acting without swing stroke
    piston diameter [mm]
    25
    rod diameter [mm]
    20
    max. pulling force [kN]
    6.1
    max. operating pressure [bar]
    350
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    top flange
    position monitoring
    without
    pressure range
    high pressure
    clamping stroke [mm]
    12
    extended piston rod
    without
    max. clamping force [kN]
    4.9
    swing mechanism
    reinforced
    overload protection device
    without
    query of
    without
    swing angle [°]
    90
    swing direction
    cw
    swing stroke [mm]
    total stroke [mm]
    12
    wiper material
    metal
    clamping arm seat
    cone 1:10
    Item no.
    1893N90R12MH
    functioning
    double acting without swing stroke
    piston diameter [mm]
    25
    rod diameter [mm]
    20
    max. pulling force [kN]
    6.1
    max. operating pressure [bar]
    350
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    top flange
    position monitoring
    accessory: electrical or pneumatic
    pressure range
    high pressure
    clamping stroke [mm]
    12
    extended piston rod
    with
    max. clamping force [kN]
    4.9
    swing mechanism
    reinforced
    overload protection device
    without
    query of
    piston: clamped and unclamped
    swing angle [°]
    90
    swing direction
    cw
    swing stroke [mm]
    total stroke [mm]
    12
    wiper material
    FKM
    clamping arm seat
    cone 1:10
    Item no.
    1893N90R12MM
    functioning
    double acting without swing stroke
    piston diameter [mm]
    25
    rod diameter [mm]
    20
    max. pulling force [kN]
    6.1
    max. operating pressure [bar]
    350
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    top flange
    position monitoring
    accessory: electrical or pneumatic
    pressure range
    high pressure
    clamping stroke [mm]
    12
    extended piston rod
    with
    max. clamping force [kN]
    4.9
    swing mechanism
    reinforced
    overload protection device
    without
    query of
    piston: clamped and unclamped
    swing angle [°]
    90
    swing direction
    cw
    swing stroke [mm]
    total stroke [mm]
    12
    wiper material
    metal
    clamping arm seat
    cone 1:10
    Item no.
    1895N90L16DH
    functioning
    double acting without swing stroke
    piston diameter [mm]
    40
    rod diameter [mm]
    32
    max. pulling force [kN]
    15.8
    max. operating pressure [bar]
    350
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    top flange
    position monitoring
    without
    pressure range
    high pressure
    clamping stroke [mm]
    16
    extended piston rod
    without
    max. clamping force [kN]
    12
    swing mechanism
    reinforced
    overload protection device
    without
    query of
    without
    swing angle [°]
    90
    swing direction
    ccw
    swing stroke [mm]
    total stroke [mm]
    16
    wiper material
    FKM
    clamping arm seat
    cone 1:10
    Item no.
    1895N90L16DM
    functioning
    double acting without swing stroke
    piston diameter [mm]
    40
    rod diameter [mm]
    32
    max. pulling force [kN]
    15.8
    max. operating pressure [bar]
    350
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    top flange
    position monitoring
    without
    pressure range
    high pressure
    clamping stroke [mm]
    16
    extended piston rod
    without
    max. clamping force [kN]
    12
    swing mechanism
    reinforced
    overload protection device
    without
    query of
    without
    swing angle [°]
    90
    swing direction
    ccw
    swing stroke [mm]
    total stroke [mm]
    16
    wiper material
    metal
    clamping arm seat
    cone 1:10
    Accessories (11)
    Item no. CAD data Description
    Item no.
    3829099
    CAD data
    Description
    Connecting cable with pnp right angle plug M8 with 2 LED, cable length 5m as per data sheet G2.140
    Error loading CAD data. Please check your internet connection and try again.
    Please note: Our CAD data are generally simplified data and primarily reflect the outer contour and connections of the product (see also Terms of use). Please always refer to the relevant catalogue sheet for the exact dimensions with tolerances, in particular the information on mounting holes or attachments such as special clamps.