Swing clamp with reinforced swing mechanism
Top flange type, double acting, max. operating pressure 120 bar
Position monitoring optional: pneumatically integrated / electrically attachable
Top flange type, double acting, max. operating pressure 120 bar
Hydraulic swing clamps are used for clamping of workpieces, when it is essential to keep the clamping area free of straps and clamping components for unrestricted workpiece loading and unloading.
This series obtains very high clamping forces already at 120 bar and can directly be connected to the low-pressure hydraulics of the machine tool.
An additional power unit for power workholding is no longer necessary.
With the reinforced swing mechanism and the optional position monitoring these swing clamps are particularly suitable for:
- Automatic manufacturing systems with very short cycle times
- Clamping fixtures with workpiece loading by handling systems
- Transfer lines
- Test systems for motors, gears and axes
- Assembly lines
- Special machine tools
The hydraulic swing clamp is a pull-type cylinder where a part of the total stroke is used to swing the piston.
Due to the reinforced swing mechanism the angle position of the clamping arm remains the same after a slight collision with the workpiece during loading and unloading or during clamping.
The angle position of the clamping arm is fixed with a dowel pin.
The FKM wiper at the piston rod can be protected against coarse and hot swarf by an optionally available metallic wiper.
The version with extended switch rod is provided for mounting of pneumatic or electrical position monitorings (accessory).
Advantages
● 4 sizes available
● Compact design partially recessible
● High clamping force already at 120 bar
● Extremely short clamping and unclamping times
● Accessory throttle valve, screw-in
● Indexing of clamping arm
● Standard FKM wiper
● Metallic wiper optional
● Pneumatic position monitoring integrated for type 186XP, standard
● Electrical position monitoring for type 186XQ, available as accessory
● Mounting position: any
Item no. | CAD data | functioning | piston diameter [mm] | rod diameter [mm] | max. pulling force [kN] | |
---|---|---|---|---|---|---|
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
|
Item no. | CAD data | Description |
---|---|---|
Item no.
|
CAD data
|
Description
Flow control valve G1/8
as per data sheet B1.8500
|
Item no.
|
CAD data
|
Description
Flow control valve G1/4
max. 350 bar, as per data sheet B1.8500
|
Item no.
|
CAD data
|
Description
O-ring 7 x 1.5 mm, NBR
as per data sheet B1.5091
|
Item no.
|
CAD data
|
Description
O-ring 8 x 1.5 mm, NBR
as per data sheet B1.5091
|
Item no.
|
CAD data
|
Description
Dowel pin 6m 6x12 mm
as per data sheet B1.8500
|
Item no.
|
Description
Hexagon nut M18 x 1.5 - DIN 936
tightening torque 30 Nm
as per data sheet B1.8500
|
|
Item no.
|
CAD data
|
Description
Dowel pin 3m 6x8 mm
as per data sheet B1.8500
|
Item no.
|
CAD data
|
Description
Hexagon nut M24 x 1.5 mm - DIN 936
as per data sheet D8.756
|
Item no.
|
Description
Hexagon nut M12 - DIN 936
tightening torque 12 Nm
as per data sheet B1.8500
|
|
Item no.
|
Description
Hexagon nut M30 x 1.5 - DIN 936
tightening torque 110 Nm
as per data sheet B1.8500
|
Take advantage of the free benefits of our login area:
- CAD data download
- Download operating instructions
Welcome back! Log in to your already existing user account.