Contact
Series
J7.203

Pneumatic swing clamp

Top flange type, for adjustable magnetic sensors
double acting
max. operating pressure 7 bar
Pneumatic swing clamp
Downloads
Catalogue sheet
Operating instructions
Information Series
Description
Top flange type J 7.203

Application
Pneumatic swing clamps are used for applications which require only low clamping forces. The installed magnetic piston allows monitoring of clamping and unclamping position.

Description
When pressurising the element, the clamping arm swings and lowers by 90° to the clamping position and then lowers to the clamping point.
The position monitoring gives the required information regarding the position of the piston, but not regarding the position of the clamping arm. 
Monitoring is made by electronic sensors (see accessory) which detect the magnetic field of the magnetic piston. The switching points can be continuously adjusted by displacement of the magnetic sensors.

Installation
On fixtures flange-type swing clamps or threaded versions with corresponding collar nuts can be easily adjusted to different workpiece heights.
Air supply can be effected via connection threads or drilled channels at the bottom of the flange.

Material
The swing clamps are supplied in corrosion resistant quality. Guide bushing, housing, piston, and flange are made of hardcoated aluminium.
The piston rod is made of corrosion resistant steel.

Important notes
Operating of these pneumatic elements has to be effected with an additional service unit in order to guarantee that the clamping elements are supplied  with correctly prepared compressed air.
Operating conditions, tolerances and other data see data sheet A 0.100.

Products (20)
Loading…
body design
top flange (20)
clamping arm seat
cone 1:10 (20)
clamping stroke [mm]
swing stroke [mm]
total stroke [mm]
swing angle [°]
90 (20)
swing direction
functioning
double acting (20)
piston diameter [mm]
rod diameter [mm]
max. operating pressure [bar]
7 (20)
position monitoring
with accessory magnetic sensors (20)
ports
max. force to pull at 6 bar [N]
Item no. CAD datafunctioningpiston diameter [mm]rod diameter [mm]max. operating pressure [bar]
Item no.
CAD data
functioning
double acting
piston diameter [mm]
20
rod diameter [mm]
8
max. operating pressure [bar]
7
Properties
Item no.
CAD data
functioning
double acting
piston diameter [mm]
20
rod diameter [mm]
8
max. operating pressure [bar]
7
Properties
Item no.
CAD data
functioning
double acting
piston diameter [mm]
20
rod diameter [mm]
8
max. operating pressure [bar]
7
Properties
Item no.
CAD data
functioning
double acting
piston diameter [mm]
20
rod diameter [mm]
8
max. operating pressure [bar]
7
Properties
Item no.
CAD data
functioning
double acting
piston diameter [mm]
32
rod diameter [mm]
12
max. operating pressure [bar]
7
Properties
Item no.
CAD data
functioning
double acting
piston diameter [mm]
32
rod diameter [mm]
12
max. operating pressure [bar]
7
Properties
Item no.
CAD data
functioning
double acting
piston diameter [mm]
32
rod diameter [mm]
12
max. operating pressure [bar]
7
Properties
Item no.
CAD data
functioning
double acting
piston diameter [mm]
32
rod diameter [mm]
12
max. operating pressure [bar]
7
Properties
Item no.
CAD data
functioning
double acting
piston diameter [mm]
40
rod diameter [mm]
16
max. operating pressure [bar]
7
Properties
Item no.
CAD data
functioning
double acting
piston diameter [mm]
40
rod diameter [mm]
16
max. operating pressure [bar]
7
Properties
Loading…
Item no.
functioning
double acting
piston diameter [mm]
20
rod diameter [mm]
8
max. operating pressure [bar]
7
body design
top flange
position monitoring
with accessory magnetic sensors
clamping stroke [mm]
7
swing angle [°]
90
swing direction
cw
swing stroke [mm]
7.5
total stroke [mm]
14.5
clamping arm seat
cone 1:10
ports
M5
max. force to pull at 6 bar [N]
158.3
Item no.
functioning
double acting
piston diameter [mm]
20
rod diameter [mm]
8
max. operating pressure [bar]
7
body design
top flange
position monitoring
with accessory magnetic sensors
clamping stroke [mm]
7
swing angle [°]
90
swing direction
cw
swing stroke [mm]
7.5
total stroke [mm]
14.5
clamping arm seat
cone 1:10
ports
drilled channels flange
max. force to pull at 6 bar [N]
158.3
Item no.
functioning
double acting
piston diameter [mm]
20
rod diameter [mm]
8
max. operating pressure [bar]
7
body design
top flange
position monitoring
with accessory magnetic sensors
clamping stroke [mm]
7
swing angle [°]
90
swing direction
ccw
swing stroke [mm]
7.5
total stroke [mm]
14.5
clamping arm seat
cone 1:10
ports
M5
max. force to pull at 6 bar [N]
158.3
Item no.
functioning
double acting
piston diameter [mm]
20
rod diameter [mm]
8
max. operating pressure [bar]
7
body design
top flange
position monitoring
with accessory magnetic sensors
clamping stroke [mm]
7
swing angle [°]
90
swing direction
ccw
swing stroke [mm]
7.5
total stroke [mm]
14.5
clamping arm seat
cone 1:10
ports
drilled channels flange
max. force to pull at 6 bar [N]
158.3
Item no.
functioning
double acting
piston diameter [mm]
32
rod diameter [mm]
12
max. operating pressure [bar]
7
body design
top flange
position monitoring
with accessory magnetic sensors
clamping stroke [mm]
9
swing angle [°]
90
swing direction
cw
swing stroke [mm]
9.5
total stroke [mm]
18.5
clamping arm seat
cone 1:10
ports
M5
max. force to pull at 6 bar [N]
414.6
Item no.
functioning
double acting
piston diameter [mm]
32
rod diameter [mm]
12
max. operating pressure [bar]
7
body design
top flange
position monitoring
with accessory magnetic sensors
clamping stroke [mm]
9
swing angle [°]
90
swing direction
cw
swing stroke [mm]
9.5
total stroke [mm]
18.5
clamping arm seat
cone 1:10
ports
drilled channels flange
max. force to pull at 6 bar [N]
414.6
Item no.
functioning
double acting
piston diameter [mm]
32
rod diameter [mm]
12
max. operating pressure [bar]
7
body design
top flange
position monitoring
with accessory magnetic sensors
clamping stroke [mm]
9
swing angle [°]
90
swing direction
ccw
swing stroke [mm]
9.5
total stroke [mm]
18.5
clamping arm seat
cone 1:10
ports
M5
max. force to pull at 6 bar [N]
414.6
Item no.
functioning
double acting
piston diameter [mm]
32
rod diameter [mm]
12
max. operating pressure [bar]
7
body design
top flange
position monitoring
with accessory magnetic sensors
clamping stroke [mm]
9
swing angle [°]
90
swing direction
ccw
swing stroke [mm]
9.5
total stroke [mm]
18.5
clamping arm seat
cone 1:10
ports
drilled channels flange
max. force to pull at 6 bar [N]
414.6
Item no.
functioning
double acting
piston diameter [mm]
40
rod diameter [mm]
16
max. operating pressure [bar]
7
body design
top flange
position monitoring
with accessory magnetic sensors
clamping stroke [mm]
15
swing angle [°]
90
swing direction
cw
swing stroke [mm]
17
total stroke [mm]
32
clamping arm seat
cone 1:10
ports
G 1/8
max. force to pull at 6 bar [N]
633.3
Item no.
functioning
double acting
piston diameter [mm]
40
rod diameter [mm]
16
max. operating pressure [bar]
7
body design
top flange
position monitoring
with accessory magnetic sensors
clamping stroke [mm]
15
swing angle [°]
90
swing direction
cw
swing stroke [mm]
17
total stroke [mm]
32
clamping arm seat
cone 1:10
ports
drilled channels flange
max. force to pull at 6 bar [N]
633.3
Accessories (24)
Item no. CAD data Description
Item no.
CAD data
Description
Contact bolt M10 x 60 mm dome-head as per data sheet J7.202
Item no.
CAD data
Description
Contact bolt M4 x 30 mm dome-head as per data sheet J7.202
Item no.
CAD data
Description
Connecting cable with pnp right angle plug M8 with 2 LED, cable length 5m as per data sheet G2.140
Item no.
CAD data
Description
Magnetic sensor pnp 10-30 VDC, 1 kHz connection: M8 bushing as per data sheet J7.203
Loading…