Contact
Series
B1.372

Low-block clamping cylinders

Articles and prices on request
single acting with spring return
max. operating pressure 500 bar
Low-block clamping cylinders
Downloads
Catalogue sheet
Operating instructions
Information Series
Description
B1.372 Low-block clamping cylinders 

The preferred application of low-block clamping cylinders are clamping situations where workholding from above is not possible or necessary. The low-clamping effect is caused by the downward motion of the clamping point. The average horizontal force component is 94% and the vertical force component is approx. 34% of the nominal clamping force. The high vertical force guarantees that the workpieces are safely held down. The clamping lever is through hardened so that the shape of the clamping point can be adapted to the workpiece by regrinding.

Products (3)
Article available on request
On request, we will check whether the article is still available
Loading…
body design
block design (3)
clamping stroke [mm]
type
low-block clamping cylinder (3)
functioning
single acting with spring return (3)
max. operating pressure [bar]
500 (3)
seals
NBR (3)
hydraulic ports
pipe thread and manifold connection with O-ring (3)
position monitoring
without (3)
pressure range
high pressure (3)
clamping lever
short clamping lever (3)
max. clamping force [kN]
self-locking
without (3)
metallic wiper
without (3)
Item no. CAD datatypefunctioningmax. operating pressure [bar]seals
Item no.
CAD data
type
low-block clamping cylinder
functioning
single acting with spring return
max. operating pressure [bar]
500
seals
NBR
Properties
Item no.
CAD data
type
low-block clamping cylinder
functioning
single acting with spring return
max. operating pressure [bar]
500
seals
NBR
Properties
Item no.
CAD data
type
low-block clamping cylinder
functioning
single acting with spring return
max. operating pressure [bar]
500
seals
NBR
Properties
Loading…
Item no.
type
low-block clamping cylinder
functioning
single acting with spring return
max. operating pressure [bar]
500
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
block design
position monitoring
without
pressure range
high pressure
clamping lever
short clamping lever
clamping stroke [mm]
8
max. clamping force [kN]
8.5
self-locking
without
metallic wiper
without
Item no.
type
low-block clamping cylinder
functioning
single acting with spring return
max. operating pressure [bar]
500
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
block design
position monitoring
without
pressure range
high pressure
clamping lever
short clamping lever
clamping stroke [mm]
10
max. clamping force [kN]
20
self-locking
without
metallic wiper
without
Item no.
type
low-block clamping cylinder
functioning
single acting with spring return
max. operating pressure [bar]
500
seals
NBR
hydraulic ports
pipe thread and manifold connection with O-ring
body design
block design
position monitoring
without
pressure range
high pressure
clamping lever
short clamping lever
clamping stroke [mm]
10
max. clamping force [kN]
40
self-locking
without
metallic wiper
without
Accessories (9)
Article available on request
On request, we will check whether the article is still available
Item no. CAD data Description
Item no.
CAD data
Description
O-ring 10 x 2 mm, NBR as per data sheet B1.5091
Item no.
CAD data
/
Description
Seal ring 4,7 x 9,3 mm see page B1.372
Item no.
CAD data
/
Description
Seal ring 6,2 x 9,2 mm see page B1.372
Item no.
CAD data
Description
Clamping lever see page B1.372
Item no.
CAD data
Description
Clamping lever see page B1.372
Item no.
CAD data
Description
Clamping lever see page B1.372
Item no.
CAD data
Description
Screw plug G1/4 SW 19 x 8 mm high max. 500 bar, as per data sheet F9.300
Item no.
CAD data
/
Description
Leg spring Ø 9 x 1,5 x 5 mm 500 bar, see page B1.372
Item no.
CAD data
/
Description
Leg spring Ø 11 x 1,6 mm legs 6,5/9,5 mm 500 bar, see page B1.372
Loading…
Application examples
Application example 1

Low-block clamping cylinder B1.372