• My requests (0)
      You do not currently have any products added to your request.
      All requests
    Search
    All results
    Contact
    (636) 386-8022 Call now
    [email protected] Contact now
    Series
    B1.8268

    Hinge Clamps 70 bar

    with throttle valve, metallic wiper edge and optional position monitoring
    double acting, max. operating pressure 70 bar
    Hinge Clamps 70 bar
    Downloads
    Catalogue sheet
    USESFR
    Operating instructions
    Information Series
    Description
    B 1.8268 Hinge clamp 70 bar

    The hinge clamp is a double acting hydraulic cylinder with integrated clamping lever. When pressurising the element, the piston moves upwards and swivels the clamping lever over the hinges forwards and at the same time downwards onto the workpiece. The piston force is deviated by 180° and, depending on the lever length, the force is available as clamping force.
    The kinematics are so designed that no side loads enter into the workpiece, if the clamping surface is at the same height as the centre of rotation of the clamping lever.
    The 3 available clamping directions (L, G, R) make it easier to adapt to the workpiece shape or the hydraulic connectivity. All sizes are optionally available with switch rod for external position monitoring. Electrical and pneumatic position monitorings for the clamping and unclamping position are available as accessories.

    Products (90)
    body design
    top flange (90)
    clamping stroke [mm]
    type
    hinge clamp (90)
    functioning
    double acting (90)
    max. operating pressure [bar]
    70 (90)
    seals
    NBR (90)
    hydraulic ports
    pipe thread and manifold connection with O-ring (90)
    position monitoring
    pressure range
    low pressure (90)
    clamping lever
    extended piston rod
    max. clamping force [kN]
    metallic wiper edge
    with (90)
    Item no. CAD datatypefunctioningmax. operating pressure [bar]seals
    Item no.
    1826G7130
    CAD data
    type
    hinge clamp
    functioning
    double acting
    max. operating pressure [bar]
    70
    seals
    NBR
    Properties
    Item no.
    1826G7131
    CAD data
    type
    hinge clamp
    functioning
    double acting
    max. operating pressure [bar]
    70
    seals
    NBR
    Properties
    Item no.
    1826G7132
    CAD data
    type
    hinge clamp
    functioning
    double acting
    max. operating pressure [bar]
    70
    seals
    NBR
    Properties
    Item no.
    1826G7140
    CAD data
    type
    hinge clamp
    functioning
    double acting
    max. operating pressure [bar]
    70
    seals
    NBR
    Properties
    Item no.
    1826G7141
    CAD data
    type
    hinge clamp
    functioning
    double acting
    max. operating pressure [bar]
    70
    seals
    NBR
    Properties
    Item no.
    1826G7142
    CAD data
    type
    hinge clamp
    functioning
    double acting
    max. operating pressure [bar]
    70
    seals
    NBR
    Properties
    Item no.
    1826G7230
    CAD data
    type
    hinge clamp
    functioning
    double acting
    max. operating pressure [bar]
    70
    seals
    NBR
    Properties
    Item no.
    1826G7231
    CAD data
    type
    hinge clamp
    functioning
    double acting
    max. operating pressure [bar]
    70
    seals
    NBR
    Properties
    Item no.
    1826G7232
    CAD data
    type
    hinge clamp
    functioning
    double acting
    max. operating pressure [bar]
    70
    seals
    NBR
    Properties
    Item no.
    1826G7240
    CAD data
    type
    hinge clamp
    functioning
    double acting
    max. operating pressure [bar]
    70
    seals
    NBR
    Properties
    Item no.
    1826G7130
    type
    hinge clamp
    functioning
    double acting
    max. operating pressure [bar]
    70
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    top flange
    position monitoring
    without
    pressure range
    low pressure
    clamping lever
    without clamping lever
    clamping stroke [mm]
    2.1
    extended piston rod
    without
    max. clamping force [kN]
    2.6
    metallic wiper edge
    with
    Item no.
    1826G7131
    type
    hinge clamp
    functioning
    double acting
    max. operating pressure [bar]
    70
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    top flange
    position monitoring
    without
    pressure range
    low pressure
    clamping lever
    clamping lever with contact bolt
    clamping stroke [mm]
    2.1
    extended piston rod
    without
    max. clamping force [kN]
    2.6
    metallic wiper edge
    with
    Item no.
    1826G7132
    type
    hinge clamp
    functioning
    double acting
    max. operating pressure [bar]
    70
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    top flange
    position monitoring
    without
    pressure range
    low pressure
    clamping lever
    long clamping lever, unmachined
    clamping stroke [mm]
    2.1
    extended piston rod
    without
    max. clamping force [kN]
    2.6
    metallic wiper edge
    with
    Item no.
    1826G7140
    type
    hinge clamp
    functioning
    double acting
    max. operating pressure [bar]
    70
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    top flange
    position monitoring
    accessory: electrical or pneumatic
    pressure range
    low pressure
    clamping lever
    without clamping lever
    clamping stroke [mm]
    2.1
    extended piston rod
    with
    max. clamping force [kN]
    2.3
    metallic wiper edge
    with
    Item no.
    1826G7141
    type
    hinge clamp
    functioning
    double acting
    max. operating pressure [bar]
    70
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    top flange
    position monitoring
    accessory: electrical or pneumatic
    pressure range
    low pressure
    clamping lever
    clamping lever with contact bolt
    clamping stroke [mm]
    2.1
    extended piston rod
    with
    max. clamping force [kN]
    2.3
    metallic wiper edge
    with
    Item no.
    1826G7142
    type
    hinge clamp
    functioning
    double acting
    max. operating pressure [bar]
    70
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    top flange
    position monitoring
    accessory: electrical or pneumatic
    pressure range
    low pressure
    clamping lever
    long clamping lever, unmachined
    clamping stroke [mm]
    2.1
    extended piston rod
    with
    max. clamping force [kN]
    2.3
    metallic wiper edge
    with
    Item no.
    1826G7230
    type
    hinge clamp
    functioning
    double acting
    max. operating pressure [bar]
    70
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    top flange
    position monitoring
    without
    pressure range
    low pressure
    clamping lever
    without clamping lever
    clamping stroke [mm]
    2.5
    extended piston rod
    without
    max. clamping force [kN]
    3.5
    metallic wiper edge
    with
    Item no.
    1826G7231
    type
    hinge clamp
    functioning
    double acting
    max. operating pressure [bar]
    70
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    top flange
    position monitoring
    without
    pressure range
    low pressure
    clamping lever
    clamping lever with contact bolt
    clamping stroke [mm]
    2.5
    extended piston rod
    without
    max. clamping force [kN]
    3.5
    metallic wiper edge
    with
    Item no.
    1826G7232
    type
    hinge clamp
    functioning
    double acting
    max. operating pressure [bar]
    70
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    top flange
    position monitoring
    without
    pressure range
    low pressure
    clamping lever
    long clamping lever, unmachined
    clamping stroke [mm]
    2.5
    extended piston rod
    without
    max. clamping force [kN]
    3.5
    metallic wiper edge
    with
    Item no.
    1826G7240
    type
    hinge clamp
    functioning
    double acting
    max. operating pressure [bar]
    70
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    body design
    top flange
    position monitoring
    accessory: electrical or pneumatic
    pressure range
    low pressure
    clamping lever
    without clamping lever
    clamping stroke [mm]
    2.5
    extended piston rod
    with
    max. clamping force [kN]
    3.1
    metallic wiper edge
    with
    Accessories (24)
    Item no. CAD data Description
    Item no.
    0353341
    CAD data
    Description
    Pneumatic position monitoring size 1 for 1826-X714X as per data sheet B1.8268
    Item no.
    0353341A
    CAD data
    Description
    Mounting body, complete for pneumatic position monitoring 0353-341 for hinge clamp 1826-X714X as per data sheet B1.8268
    Item no.
    0353342
    CAD data
    Description
    Pneumatic position monitoring size 2 for 1826-X724X as per data sheet B1.8268
    Item no.
    0353342A
    CAD data
    Description
    Mounting body, complete for pneumatic position monitoring 0353-342 for hinge clamp 1826-X724X as per data sheet B1.8268
    Item no.
    0353343
    CAD data
    Description
    Pneumatic position monitoring size 3 for 1826-X734X as per data sheet B1.8268
    Item no.
    0353343A
    CAD data
    Description
    Mounting body, complete for pneumatic position monitoring 0353-343 for hinge clamp 1826-X734X as per data sheet B1.8268
    Item no.
    0353344
    CAD data
    Description
    Pneumatic position monitoring size 4 for 1826-X744X as per data sheet B1.8268
    Item no.
    0353344A
    CAD data
    Description
    Mounting body, complete for pneumatic position monitoring 0353-344 for hinge clamp 1826-X744X as per data sheet B1.8268
    Item no.
    0353345
    CAD data
    Description
    Pneumatic position monitoring size 5 for 1826-X754X as per data sheet B1.8268
    Item no.
    0353345A
    CAD data
    Description
    Mounting body, complete for pneumatic position monitoring 0353-345 for hinge clamp 1826-X754X as per data sheet B1.8268
    Error loading CAD data. Please check your internet connection and try again.
    Please note: Our CAD data are generally simplified data and primarily reflect the outer contour and connections of the product (see also Terms of use). Please always refer to the relevant catalogue sheet for the exact dimensions with tolerances, in particular the information on mounting holes or attachments such as special clamps.