• My requests (0)
      You do not currently have any products added to your request.
      All requests
    Search
    All results
    Contact
    (636) 386-8022 Call now
    [email protected] Contact now
    Series
    I4.120

    Fixture clamp, concentric clamping

    max. clamping force 6.5 and 9 kN
    jaw width 40 and 65 mm
    double acting
    max. operating pressure 250 bar
    Fixture clamp, concentric clamping
    Downloads
    Catalogue sheet
    USESFR
    Operating instructions
    Request product
    Check Pricing and Availability
    Go to Carrlane.com
    Information Series
    Description
    I 4.120 Fixture Clamp, concentric clamping

    Application
    The fixture clamps are used for machining of dimensionally stable workpieces in single or multiple clamping fixtures.
    Due to their compact design they can be arranged in a very limited space. Fixture clamps are especially suitable for series manufacturing 
    in automated mode.
    The double-acting cylinder function combined with central lubrication and good swarf protection guarantees a high process safety.

    Description
    The fixture clamp with concentric clamping function consists of a very slim basic body with 2 integrated hydraulic cylinders.
    The piston forces are transfered via a guided connecting link to the two clamping slides so that a centric synchronism is obtained. All threads and ports are at the bottom to allow a space-saving arrangement of several clamping points in a very limited space. If fixing from below is not possible an adaptor plate for manifold mounting or tube connection is available.
    As accessory also blanks of clamping  jaws are available for adaptation to the workpiece contour. 

    Important notes
    The fixture clamp is only suitable for exterior clamping. 
    Lubricate at the latest after 500 clamping cycles the clamping slide via the central lubrication. Never use the complete clamping stroke to guarantee safe clamping of the workpiece.

    Max. operating temperature 80 °C
    Operating conditions and other data see data sheet A 0.100

     

    Products (2)
    clamping stroke [mm]
    functioning
    double acting (2)
    max. operating pressure [bar]
    250 (2)
    seals
    NBR (2)
    hydraulic ports
    pipe thread and manifold connection with O-ring (2)
    seat check
    without (2)
    max. clamping force [kN]
    jaw width [mm]
    central lubrication
    with (2)
    Item no. CAD datafunctioningmax. operating pressure [bar]sealshydraulic ports
    Item no.
    4413051
    CAD data
    functioning
    double acting
    max. operating pressure [bar]
    250
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    Properties
    Item no.
    4413151
    CAD data
    functioning
    double acting
    max. operating pressure [bar]
    250
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    Properties
    Item no.
    4413051
    functioning
    double acting
    max. operating pressure [bar]
    250
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    seat check
    without
    clamping stroke [mm]
    2 x 5
    max. clamping force [kN]
    2 x 6,5
    jaw width [mm]
    40
    central lubrication
    with
    Item no.
    4413151
    functioning
    double acting
    max. operating pressure [bar]
    250
    seals
    NBR
    hydraulic ports
    pipe thread and manifold connection with O-ring
    seat check
    without
    clamping stroke [mm]
    2 x 8
    max. clamping force [kN]
    2 x 9,0
    jaw width [mm]
    65
    central lubrication
    with
    Accessories (10)
    Item no. CAD data Description
    Item no.
    0441305
    CAD data
    Description
    Adaptor plate for fixture clamp 4413-051/-080 max. 250 bar, as per data sheet I4.120
    Item no.
    0441315
    CAD data
    Description
    Adaptor plate for fixture clamp 4413-151 max. 250 bar, as per data sheet I4.120
    Item no.
    3001842
    CAD data
    /
    Description
    O-ring 5 x 1 mm - NBR as per data sheet I4.120
    Item no.
    3300225
    CAD data
    /
    Description
    Socket head cap screw M6 x 20 mm - 8.8 as per data sheet I4.120
    Item no.
    3300625
    CAD data
    /
    Description
    Socket head cap screw M8 x 25 - 12.9 as per data sheet I4.111
    Item no.
    3301107
    CAD data
    Description
    Socket head cap screw M6 x 16 - 12.9 as per data sheet I4.120
    Item no.
    3301263
    CAD data
    Description
    Socket head cap screw M8 x 20 mm, 8.8, galvanized as per data sheet B1.7441
    Item no.
    3548070
    CAD data
    Description
    Clamping jaw 40 mm version: Clamping jaw (blank) material: 16 MnCr5 soft as per data sheet I4.120
    Item no.
    3548080
    CAD data
    Description
    Clamping jaw 65 mm version: Clamping jaw (blank) material: 16 MnCr5 soft as per data sheet I4.120
    Item no.
    9210132
    CAD data
    Description
    Plug-type connector ND5 - Ø10 x 14 mm short version, with FKM seals max. 500 bar, as per data sheet F9.300
    Application examples
    Fixture clamp, concentric clamping

    Concentric clamping of 8 flanges on a rotary indexing fixture.

    Error loading CAD data. Please check your internet connection and try again.
    Please note: Our CAD data are generally simplified data and primarily reflect the outer contour and connections of the product (see also Terms of use). Please always refer to the relevant catalogue sheet for the exact dimensions with tolerances, in particular the information on mounting holes or attachments such as special clamps.