Fixture clamp, concentric clamping
jaw width 40 and 65 mm
double acting
max. operating pressure 250 bar
Application
The fixture clamps are used for machining of dimensionally stable workpieces in single or multiple clamping fixtures.
Due to their compact design they can be arranged in a very limited space. Fixture clamps are especially suitable for series manufacturing
in automated mode.
The double-acting cylinder function combined with central lubrication and good swarf protection guarantees a high process safety.
Description
The fixture clamp with concentric clamping function consists of a very slim basic body with 2 integrated hydraulic cylinders.
The piston forces are transfered via a guided connecting link to the two clamping slides so that a centric synchronism is obtained. All threads and ports are at the bottom to allow a space-saving arrangement of several clamping points in a very limited space. If fixing from below is not possible an adaptor plate for manifold mounting or tube connection is available.
As accessory also blanks of clamping jaws are available for adaptation to the workpiece contour.
Important notes
The fixture clamp is only suitable for exterior clamping.
Lubricate at the latest after 500 clamping cycles the clamping slide via the central lubrication. Never use the complete clamping stroke to guarantee safe clamping of the workpiece.
Max. operating temperature 80 °C
Operating conditions and other data see data sheet A 0.100
Item no. | CAD data | functioning | max. operating pressure [bar] | seals | hydraulic ports | |
---|---|---|---|---|---|---|
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
|
Item no. | CAD data | Description |
---|---|---|
Item no.
|
CAD data
|
Description
Adaptor plate
for fixture clamp 4413-051/-080
max. 250 bar, as per data sheet I4.120
|
Item no.
|
CAD data
|
Description
Adaptor plate
for fixture clamp 4413-151
max. 250 bar, as per data sheet I4.120
|
Item no.
|
Description
O-ring 5 x 1 mm - NBR
as per data sheet I4.120
|
|
Item no.
|
Description
Socket head cap screw
M6 x 20 mm - 8.8
as per data sheet I4.120
|
|
Item no.
|
Description
Socket head cap screw M8 x 25 - 12.9
as per data sheet I4.111
|
|
Item no.
|
CAD data
|
Description
Socket head cap screw M6 x 16 - 12.9
as per data sheet I4.120
|
Item no.
|
CAD data
|
Description
Socket head cap screw
M8 x 20 mm, 8.8, galvanized
as per data sheet B1.7441
|
Item no.
|
CAD data
|
Description
Clamping jaw 40 mm
version: Clamping jaw (blank)
material: 16 MnCr5 soft
as per data sheet I4.120
|
Item no.
|
CAD data
|
Description
Clamping jaw 65 mm
version: Clamping jaw (blank)
material: 16 MnCr5 soft
as per data sheet I4.120
|
Item no.
|
CAD data
|
Description
Plug-type connector ND5 - Ø10 x 14 mm
short version, with FKM seals
max. 500 bar, as per data sheet F9.300
|
Concentric clamping of 8 flanges on a rotary indexing fixture.
Take advantage of the free benefits of our login area:
- CAD data download
- Download operating instructions
Welcome back! Log in to your already existing user account.