Electric Swing Clamps
The electric swing clamp is driven by a brushless DC motor.
The motor speed is transformed by means of a gear and a threaded spindle into the swing and stroke movement of the piston rod.
For swinging the clamping arm by 180°, an axial stroke of only 3 mm is required.
If the clamping arm collides during the swing motion with a workpiece, the mechanism is protected against overload. The direct current motor is automatically and immediately switched off.
When unclamping, the clamping arm always swings back to the off-position.
Power supply
For motor and electronic control a DC voltage of 24 V with a residual ripple of max. 10 % is required. For the DC motor, we recommend the use of a switching power supply with a current output of 15 A per connected electric swing clamp. When operating several swing clamps at the same time, the line is to be enlarged correspondingly. The electronic control has to be supplied by a separate power supply (24 V DC / 100 mA).
Integrated control
The electronic control for the DC motor is on a board in the housing of the electric swing clamp.
After removal of the protection cover for example the clamping force can be adjusted.
Item no. | CAD data | body design | position monitoring | metallic wiper | swing angle [°] | |
---|---|---|---|---|---|---|
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
|
Item no. | CAD data | Description |
---|---|---|
Item no.
|
CAD data
|
Description
Metallic wiper
for 1835-XXX
for piston rod Ø 36 mm
as per data sheet B1.8310
|
Item no.
|
CAD data
|
Description
Clamping arm, complete for 18X3-XXX
with thread, material: 42CrMo4
max. 200 bar, as per data sheet B1.880
|
Item no.
|
CAD data
|
Description
Clamping arm, complete for 18X5-XXX
with thread, material: 42CrMo4
max. 200 bar, as per data sheet B1.880
|
Item no.
|
CAD data
|
Description
Double clamping arm assembly, complete for 18X3-XXX
with carrier, material: GGG-40
max. 500 bar, as per data sheet B1.880
|
Item no.
|
CAD data
|
Description
Double clamping arm assembly, complete for 18X5-XXX
with carrier, material: GGG-40
max. 500 bar, as per data sheet B1.880
|
Item no.
|
CAD data
|
Description
Carrier, complete for 18X3-XXX
with threaded bolt and spring clamping elements
material: C 45
as per data sheet B1.880
|
Item no.
|
CAD data
|
Description
Carrier, complete for 18X5-XXX
with threaded bolt and spring clamping elements
material: C 45
as per data sheet B1.880
|
Item no.
|
CAD data
|
Description
Cable socket Hirschmann CA3LD
as per data sheet B1.8310
|
Item no.
|
CAD data
|
Description
Cable socket Binder 423 12 POL.
as per data sheet B1.8310
|
Item no.
|
CAD data
|
Description
Dowel pin 6m 6x12 mm
as per data sheet B1.8500
|
Take advantage of the free benefits of our login area:
- CAD data download
- Download operating instructions
Welcome back! Log in to your already existing user account.