• My requests (0)
      You do not currently have any products added to your request.
      All requests
    Search
    All results
    Contact
    (636) 386-8022 Call now
    [email protected] Contact now
    Series
    B1.8310

    Electric Clamp - Swing Clamp Version

    Top flange, position and clamping force monitoring, IO-Link connection ptional, DC voltage 24 V, minimum energy demand
    Electric Clamp - Swing Clamp Version
    Downloads
    Catalogue sheet
    USESFR
    Operating instructions
    Request product
    Check Pricing and Availability
    Go to Carrlane.com
    Information Series
    Description
    B 1.8310 Electric Clamp 

    Version
    This electric clamp is an electrically operated swing clamp.

    Description
    The electric clamp is driven by a brushless DC motor. 
    The motor speed is transformed by means of a gear and a threaded spindle into the swing and stroke movement of the piston rod. For swinging the clamping arm by 180°, an axial stroke of only 3 mm is required.
    If the clamping arm collides during the swing motion with a workpiece, the mechanism is protected against overload. The direct current motor is automatically and immediately switched off.
    When unclamping, the clamping arm always swings back to the off-position.

    Power supply
    For motor and electronic control a DC voltage of 24 V with a residual ripple of max. 10 % is required. For the DC motor, we recommend the use of a switching power supply with a current output of 15 A per connected electric clamp. When operating several electric clamps at the same time, the line is to be enlarged correspondingly. The electronic control has to be supplied by a separate power supply (24 V DC / 100 mA).

    Integrated control
    The electronic control for the DC motor is on a board in the housing of the electric clamp.
    After removal of the protection cover for example the clamping force can be adjusted.

    Video
    Products (20)
    body design
    top flange (20)
    size
    1835 (20)
    clamping arm seat
    cone 1:10 (20)
    swing stroke [mm]
    4 (20)
    total stroke [mm]
    26 (20)
    swing angle [°]
    swing direction
    position monitoring
    with (20)
    metallic wiper
    code class
    IP 67 (20)
    nominal voltage [VDC]
    24 (20)
    camping force control
    with (20)
    axial pull force [kN]
    3 - 9 (20)
    usable clamping stroke [mm]
    20 (20)
    IO-Link
    Item no. CAD databody designposition monitoringmetallic wiperswing angle [°]
    Item no.
    1835C000026
    CAD data
    body design
    top flange
    position monitoring
    with
    metallic wiper
    without
    swing angle [°]
    without
    Properties
    Item no.
    1835C0000260I
    CAD data
    body design
    top flange
    position monitoring
    with
    metallic wiper
    without
    swing angle [°]
    without
    Properties
    Item no.
    1835C000026M
    CAD data
    body design
    top flange
    position monitoring
    with
    metallic wiper
    with
    swing angle [°]
    without
    Properties
    Item no.
    1835C000026MI
    CAD data
    body design
    top flange
    position monitoring
    with
    metallic wiper
    with
    swing angle [°]
    without
    Properties
    Item no.
    1835C090L26
    CAD data
    body design
    top flange
    position monitoring
    with
    metallic wiper
    without
    swing angle [°]
    90
    Properties
    Item no.
    1835C090L260I
    CAD data
    body design
    top flange
    position monitoring
    with
    metallic wiper
    without
    swing angle [°]
    90
    Properties
    Item no.
    1835C090L26M
    CAD data
    body design
    top flange
    position monitoring
    with
    metallic wiper
    with
    swing angle [°]
    90
    Properties
    Item no.
    1835C090L26MI
    CAD data
    body design
    top flange
    position monitoring
    with
    metallic wiper
    with
    swing angle [°]
    90
    Properties
    Item no.
    1835C090R26
    CAD data
    body design
    top flange
    position monitoring
    with
    metallic wiper
    without
    swing angle [°]
    90
    Properties
    Item no.
    1835C090R260I
    CAD data
    body design
    top flange
    position monitoring
    with
    metallic wiper
    without
    swing angle [°]
    90
    Properties
    Item no.
    1835C000026
    body design
    top flange
    position monitoring
    with
    metallic wiper
    without
    swing angle [°]
    without
    swing direction
    none
    swing stroke [mm]
    4
    total stroke [mm]
    26
    clamping arm seat
    cone 1:10
    code class
    IP 67
    nominal voltage [VDC]
    24
    camping force control
    with
    axial pull force [kN]
    3 - 9
    usable clamping stroke [mm]
    20
    IO-Link
    without
    size
    1835
    Item no.
    1835C0000260I
    body design
    top flange
    position monitoring
    with
    metallic wiper
    without
    swing angle [°]
    without
    swing direction
    none
    swing stroke [mm]
    4
    total stroke [mm]
    26
    clamping arm seat
    cone 1:10
    code class
    IP 67
    nominal voltage [VDC]
    24
    camping force control
    with
    axial pull force [kN]
    3 - 9
    usable clamping stroke [mm]
    20
    IO-Link
    with
    size
    1835
    Item no.
    1835C000026M
    body design
    top flange
    position monitoring
    with
    metallic wiper
    with
    swing angle [°]
    without
    swing direction
    none
    swing stroke [mm]
    4
    total stroke [mm]
    26
    clamping arm seat
    cone 1:10
    code class
    IP 67
    nominal voltage [VDC]
    24
    camping force control
    with
    axial pull force [kN]
    3 - 9
    usable clamping stroke [mm]
    20
    IO-Link
    without
    size
    1835
    Item no.
    1835C000026MI
    body design
    top flange
    position monitoring
    with
    metallic wiper
    with
    swing angle [°]
    without
    swing direction
    none
    swing stroke [mm]
    4
    total stroke [mm]
    26
    clamping arm seat
    cone 1:10
    code class
    IP 67
    nominal voltage [VDC]
    24
    camping force control
    with
    axial pull force [kN]
    3 - 9
    usable clamping stroke [mm]
    20
    IO-Link
    with
    size
    1835
    Item no.
    1835C090L26
    body design
    top flange
    position monitoring
    with
    metallic wiper
    without
    swing angle [°]
    90
    swing direction
    ccw
    swing stroke [mm]
    4
    total stroke [mm]
    26
    clamping arm seat
    cone 1:10
    code class
    IP 67
    nominal voltage [VDC]
    24
    camping force control
    with
    axial pull force [kN]
    3 - 9
    usable clamping stroke [mm]
    20
    IO-Link
    without
    size
    1835
    Item no.
    1835C090L260I
    body design
    top flange
    position monitoring
    with
    metallic wiper
    without
    swing angle [°]
    90
    swing direction
    ccw
    swing stroke [mm]
    4
    total stroke [mm]
    26
    clamping arm seat
    cone 1:10
    code class
    IP 67
    nominal voltage [VDC]
    24
    camping force control
    with
    axial pull force [kN]
    3 - 9
    usable clamping stroke [mm]
    20
    IO-Link
    with
    size
    1835
    Item no.
    1835C090L26M
    body design
    top flange
    position monitoring
    with
    metallic wiper
    with
    swing angle [°]
    90
    swing direction
    ccw
    swing stroke [mm]
    4
    total stroke [mm]
    26
    clamping arm seat
    cone 1:10
    code class
    IP 67
    nominal voltage [VDC]
    24
    camping force control
    with
    axial pull force [kN]
    3 - 9
    usable clamping stroke [mm]
    20
    IO-Link
    without
    size
    1835
    Item no.
    1835C090L26MI
    body design
    top flange
    position monitoring
    with
    metallic wiper
    with
    swing angle [°]
    90
    swing direction
    ccw
    swing stroke [mm]
    4
    total stroke [mm]
    26
    clamping arm seat
    cone 1:10
    code class
    IP 67
    nominal voltage [VDC]
    24
    camping force control
    with
    axial pull force [kN]
    3 - 9
    usable clamping stroke [mm]
    20
    IO-Link
    with
    size
    1835
    Item no.
    1835C090R26
    body design
    top flange
    position monitoring
    with
    metallic wiper
    without
    swing angle [°]
    90
    swing direction
    cw
    swing stroke [mm]
    4
    total stroke [mm]
    26
    clamping arm seat
    cone 1:10
    code class
    IP 67
    nominal voltage [VDC]
    24
    camping force control
    with
    axial pull force [kN]
    3 - 9
    usable clamping stroke [mm]
    20
    IO-Link
    without
    size
    1835
    Item no.
    1835C090R260I
    body design
    top flange
    position monitoring
    with
    metallic wiper
    without
    swing angle [°]
    90
    swing direction
    cw
    swing stroke [mm]
    4
    total stroke [mm]
    26
    clamping arm seat
    cone 1:10
    code class
    IP 67
    nominal voltage [VDC]
    24
    camping force control
    with
    axial pull force [kN]
    3 - 9
    usable clamping stroke [mm]
    20
    IO-Link
    with
    size
    1835
    Accessories (18)
    Item no. CAD data Description
    Item no.
    0341231
    CAD data
    Description
    Metallic wiper for 1835-XXX for piston rod Ø 36 mm as per data sheet B1.8310
    Item no.
    0354001
    CAD data
    Description
    Clamping arm, complete for 18X3-XXX with thread, material: 42CrMo4 max. 200 bar, as per data sheet B1.880
    Item no.
    0354003
    CAD data
    Description
    Clamping arm, complete for 18X5-XXX with thread, material: 42CrMo4 max. 200 bar, as per data sheet B1.880
    Item no.
    0354131
    CAD data
    Description
    Double clamping arm assembly, complete for 18X3-XXX with carrier, material: GGG-40 max. 500 bar, as per data sheet B1.880
    Item no.
    0354132
    CAD data
    Description
    Double clamping arm assembly, complete for 18X5-XXX with carrier, material: GGG-40 max. 500 bar, as per data sheet B1.880
    Item no.
    0354141
    CAD data
    Description
    Carrier, complete for 18X3-XXX with threaded bolt and spring clamping elements material: C 45 as per data sheet B1.880
    Item no.
    0354142
    CAD data
    Description
    Carrier, complete for 18X5-XXX with threaded bolt and spring clamping elements material: C 45 as per data sheet B1.880
    Item no.
    3141991
    CAD data
    Description
    Cable socket Hirschmann CA3LD as per data sheet B1.8310
    Item no.
    3141992
    CAD data
    Description
    Cable socket Binder 423 12 POL. as per data sheet B1.8310
    Item no.
    3300325
    CAD data
    Description
    Dowel pin 6m 6x12 mm as per data sheet B1.8500
    Error loading CAD data. Please check your internet connection and try again.
    Please note: Our CAD data are generally simplified data and primarily reflect the outer contour and connections of the product (see also Terms of use). Please always refer to the relevant catalogue sheet for the exact dimensions with tolerances, in particular the information on mounting holes or attachments such as special clamps.