Contact
Series
B1.552

Block cylinders

double acting with extended piston rod for position monitoring
max. operating pressure 500 bar
Block cylinders
Downloads
Catalogue sheet
Operating instructions
Information Series
Description
B 1.552 Block Cylinders double acting, with extended piston rod for position monitoring

Block cylinders with extended piston rods are used if one or several piston positions have to be controlled.

Especially if:

  • Standard inductive proximity switches should be used
  • The piston positions have to be adjusted on the spot
  • Control has to be effected at the cylinder bottom due to space restrictions

The piston is equipped with a rod of diameter 10 mm that protrudes at the cylinder bottom. At this rod the customer can fix a control cam that is used to operate any limit switch or sensor.
As an accessory a complete position monitoring system is available. This unit contains a control cam as well as two inductive proximitiy switches. The switches can be displaced in the housing. The housing will be screwed on at the cylinder bottom.

stroke end control with inductive proximity switches
stroke end control with inductive proximity switches
Products (64)
Loading…
type
block cylinder (64)
stroke [mm]
functioning
double acting (64)
stroke end cushioning
without (64)
piston diameter [mm]
rod diameter [mm]
seals
FKM (64)
fixation
piston rod end
hydraulic ports
spherical bearing
max. operating pressure [bar]
500 (64)
position monitoring
accessory: electrical position monitoring (64)
material of the body
steel (64)
max. force to push [kN]
max. force to pull [kN]
operating temperature [°C]
-20...+200 (64)
keyway
without (64)
centring collar
without (64)
anti-torsion device
without (64)
stainless
no (64)
Item no. CAD datatypestroke [mm]functioningstroke end cushioning
Item no.
CAD data
type
block cylinder
stroke [mm]
20
functioning
double acting
stroke end cushioning
without
Properties
Item no.
CAD data
type
block cylinder
stroke [mm]
20
functioning
double acting
stroke end cushioning
without
Properties
Item no.
CAD data
type
block cylinder
stroke [mm]
20
functioning
double acting
stroke end cushioning
without
Properties
Item no.
CAD data
type
block cylinder
stroke [mm]
20
functioning
double acting
stroke end cushioning
without
Properties
Item no.
CAD data
type
block cylinder
stroke [mm]
50
functioning
double acting
stroke end cushioning
without
Properties
Item no.
CAD data
type
block cylinder
stroke [mm]
50
functioning
double acting
stroke end cushioning
without
Properties
Item no.
CAD data
type
block cylinder
stroke [mm]
50
functioning
double acting
stroke end cushioning
without
Properties
Item no.
CAD data
type
block cylinder
stroke [mm]
50
functioning
double acting
stroke end cushioning
without
Properties
Item no.
CAD data
type
block cylinder
stroke [mm]
25
functioning
double acting
stroke end cushioning
without
Properties
Item no.
CAD data
type
block cylinder
stroke [mm]
25
functioning
double acting
stroke end cushioning
without
Properties
Loading…
Item no.
type
block cylinder
stroke [mm]
20
functioning
double acting
stroke end cushioning
without
piston diameter [mm]
25
rod diameter [mm]
16
seals
FKM
fixation
cross holes + 4 longitudinal holes
piston rod end
internal thread M10
hydraulic ports
pipe thread
spherical bearing
accessory
max. operating pressure [bar]
500
position monitoring
accessory: electrical position monitoring
material of the body
steel
max. force to push [kN]
20.6
max. force to pull [kN]
14.5
operating temperature [°C]
-20...+200
keyway
without
centring collar
without
anti-torsion device
without
stainless
no
Item no.
type
block cylinder
stroke [mm]
20
functioning
double acting
stroke end cushioning
without
piston diameter [mm]
25
rod diameter [mm]
16
seals
FKM
fixation
4 longitudinal holes
piston rod end
internal thread M10
hydraulic ports
O-ring manifold-mounting connection B
spherical bearing
without
max. operating pressure [bar]
500
position monitoring
accessory: electrical position monitoring
material of the body
steel
max. force to push [kN]
20.6
max. force to pull [kN]
14.5
operating temperature [°C]
-20...+200
keyway
without
centring collar
without
anti-torsion device
without
stainless
no
Item no.
type
block cylinder
stroke [mm]
20
functioning
double acting
stroke end cushioning
without
piston diameter [mm]
25
rod diameter [mm]
16
seals
FKM
fixation
cross holes
piston rod end
internal thread M10
hydraulic ports
O-ring manifold-mounting connection K
spherical bearing
without
max. operating pressure [bar]
500
position monitoring
accessory: electrical position monitoring
material of the body
steel
max. force to push [kN]
20.6
max. force to pull [kN]
14.5
operating temperature [°C]
-20...+200
keyway
without
centring collar
without
anti-torsion device
without
stainless
no
Item no.
type
block cylinder
stroke [mm]
20
functioning
double acting
stroke end cushioning
without
piston diameter [mm]
25
rod diameter [mm]
16
seals
FKM
fixation
4 longitudinal holes
piston rod end
internal thread M10
hydraulic ports
O-ring manifold-mounting connection S
spherical bearing
without
max. operating pressure [bar]
500
position monitoring
accessory: electrical position monitoring
material of the body
steel
max. force to push [kN]
20.6
max. force to pull [kN]
14.5
operating temperature [°C]
-20...+200
keyway
without
centring collar
without
anti-torsion device
without
stainless
no
Item no.
type
block cylinder
stroke [mm]
50
functioning
double acting
stroke end cushioning
without
piston diameter [mm]
25
rod diameter [mm]
16
seals
FKM
fixation
cross holes + 4 longitudinal holes
piston rod end
internal thread M10
hydraulic ports
pipe thread
spherical bearing
without
max. operating pressure [bar]
500
position monitoring
accessory: electrical position monitoring
material of the body
steel
max. force to push [kN]
20.6
max. force to pull [kN]
14.5
operating temperature [°C]
-20...+200
keyway
without
centring collar
without
anti-torsion device
without
stainless
no
Item no.
type
block cylinder
stroke [mm]
50
functioning
double acting
stroke end cushioning
without
piston diameter [mm]
25
rod diameter [mm]
16
seals
FKM
fixation
4 longitudinal holes
piston rod end
internal thread M10
hydraulic ports
O-ring manifold-mounting connection B
spherical bearing
without
max. operating pressure [bar]
500
position monitoring
accessory: electrical position monitoring
material of the body
steel
max. force to push [kN]
20.6
max. force to pull [kN]
14.5
operating temperature [°C]
-20...+200
keyway
without
centring collar
without
anti-torsion device
without
stainless
no
Item no.
type
block cylinder
stroke [mm]
50
functioning
double acting
stroke end cushioning
without
piston diameter [mm]
25
rod diameter [mm]
16
seals
FKM
fixation
cross holes
piston rod end
internal thread M10
hydraulic ports
O-ring manifold-mounting connection L
spherical bearing
without
max. operating pressure [bar]
500
position monitoring
accessory: electrical position monitoring
material of the body
steel
max. force to push [kN]
20.6
max. force to pull [kN]
14.5
operating temperature [°C]
-20...+200
keyway
without
centring collar
without
anti-torsion device
without
stainless
no
Item no.
type
block cylinder
stroke [mm]
50
functioning
double acting
stroke end cushioning
without
piston diameter [mm]
25
rod diameter [mm]
16
seals
FKM
fixation
4 longitudinal holes
piston rod end
internal thread M10
hydraulic ports
O-ring manifold-mounting connection S
spherical bearing
without
max. operating pressure [bar]
500
position monitoring
accessory: electrical position monitoring
material of the body
steel
max. force to push [kN]
20.6
max. force to pull [kN]
14.5
operating temperature [°C]
-20...+200
keyway
without
centring collar
without
anti-torsion device
without
stainless
no
Item no.
type
block cylinder
stroke [mm]
25
functioning
double acting
stroke end cushioning
without
piston diameter [mm]
32
rod diameter [mm]
20
seals
FKM
fixation
cross holes + 4 longitudinal holes
piston rod end
internal thread M12
hydraulic ports
pipe thread
spherical bearing
without
max. operating pressure [bar]
500
position monitoring
accessory: electrical position monitoring
material of the body
steel
max. force to push [kN]
36.2
max. force to pull [kN]
24.5
operating temperature [°C]
-20...+200
keyway
without
centring collar
without
anti-torsion device
without
stainless
no
Item no.
type
block cylinder
stroke [mm]
25
functioning
double acting
stroke end cushioning
without
piston diameter [mm]
32
rod diameter [mm]
20
seals
FKM
fixation
4 longitudinal holes
piston rod end
internal thread M12
hydraulic ports
O-ring manifold-mounting connection B
spherical bearing
without
max. operating pressure [bar]
500
position monitoring
accessory: electrical position monitoring
material of the body
steel
max. force to push [kN]
36.2
max. force to pull [kN]
24.5
operating temperature [°C]
-20...+200
keyway
without
centring collar
without
anti-torsion device
without
stainless
no
Accessories (16)
Item no. CAD data Description
Item no.
CAD data
Description
Position monitoring type A, standard with 2 proximity switches for block cylinders up to 30 mm stroke as per data sheet B1.552
Item no.
CAD data
Description
Position monitoring type B, compact with 2 proximity switches for block cylinders up to 30 mm stroke as per data sheet B1.552
Item no.
CAD data
Description
Position monitoring type C for high ambient temperature with 2 proximity switches for block cylinders up to 30 mm stroke as per data sheet B1.552
Item no.
CAD data
Description
Position monitoring without proximity switches for block cylinders up to 30 mm stroke as per data sheet B1.552
Item no.
CAD data
Description
Position monitoring type A, standard with 2 proximity switches for block cylinders up to 50 mm stroke as per data sheet B1.552
Item no.
CAD data
Description
Position monitoring type B, compact with 2 proximity switches for block cylinders up to 50 mm stroke as per data sheet B1.552
Item no.
CAD data
Description
Position monitoring type C for high ambient temperature with 2 proximity switches for block cylinders up to 50 mm stroke as per data sheet B1.552
Item no.
CAD data
Description
Position monitoring without proximity switches for block cylinders up to 50 mm stroke as per data sheet B1.552
Item no.
CAD data
/
Description
O-ring 8 x 1.5 mm, FKM as per data sheet B1.5091
Item no.
CAD data
Description
O-ring 7 x 1.5 mm, FKM as per data sheet B1.5091
Loading…