• My requests (0)
      You do not currently have any products added to your request.
      All requests
    Search
    All results
    Contact
    (636) 386-8022 Call now
    [email protected] Contact now
    Product
    V1SAARBK5L035H012W0000NE
    Swing clamp without swing stroke
    Swing clamp without swing stroke
    Downloads
    Catalogue sheet
    USESFRPL
    Operating instructions
    CAD data

    Further information can be found on the pages of the series.

    Show product series
    Request product
    Count
    Article description
    Swing clamp without swing stroke top flange, reinforced swing mechanism double acting, size 3 piston/rod Ø: 50/36 mm pulling force (250 bar): 23.6 kN clamping arm mount: cone 1:10 swing angle 35° ccw clamping stroke 12.0 mm, seals NBR angle of clamping position: 0° max. 250 bar, as per data sheet B1.8807
    Technical data
    • body design: top flange
    • size: 3
    • clamping arm seat: cone 1:10
    • clamping stroke [mm]: 12
    • total stroke [mm]: 12
    • swing angle [°]: 35
    • swing direction: ccw
    • functioning: double acting
    • piston diameter [mm]: 50
    • rod diameter [mm]: 36
    • max. pulling force [kN]: 23.6
    • max. operating pressure [bar]: 250
    • seals: NBR
    • hydraulic ports: pipe thread and manifold connection with O-ring
    • swing mechanism: reinforced
    Error loading CAD data. Please check your internet connection and try again.
    Please note: Our CAD data are generally simplified data and primarily reflect the outer contour and connections of the product (see also Terms of use). Please always refer to the relevant catalogue sheet for the exact dimensions with tolerances, in particular the information on mounting holes or attachments such as special clamps.