Work supports
single acting with / without spring return
max. operating pressure 500 bar
Hydraulic work supports are used to provide a self-adjusting rest for the workpiece during the machining operations. They compensate the workpiece surface irregularities, also deflection and vibration under machining loads.
Hydraulic locking is made together with hydraulic clamping of the workpiece, or independently. The support plunger is provided with female thread to enable the use of threaded pieces for height adjustment.
There are three variations of plunger actuation:
- Spring advanced; plunger extended in off-position
- Air pressure advanced; without spring return
- Air pressure advanced; with spring return
The pneumatically-actuated plunger allows precise setting of the plunger contact force by means of a pressure reducing valve. If a danger exists of sucking fluids through the pneumatic port, on the spring-advanced unit, a vent hose should be connected.
Item no. | CAD data | functioning | max. operating pressure [bar] | seals | hydraulic ports | |
---|---|---|---|---|---|---|
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
|
Item no. | CAD data | Description |
---|---|---|
Item no.
|
CAD data
|
Description
O-ring 10 x 2 mm, NBR
as per data sheet B1.5091
|
Item no.
|
Description
Seal ring 4,7 x 9,3 mm
see page B1.372
|
|
Item no.
|
CAD data
|
Description
Hose fitting G1/8
with sealing
as per data sheet B1.900
|
Item no.
|
CAD data
|
Description
Screw plug G1/4
SW 19 x 8 mm high
max. 500 bar, as per data sheet F9.300
|
Item no.
|
CAD data
|
Description
Contact bolt M10 x 12 mm
dome head
as per data sheet G3.800
|
Item no.
|
CAD data
|
Description
Contact bolt M16 x 20 mm
dome head
as per data sheet G3.800
|
Item no.
|
CAD data
|
Description
Contact bolt M12 x 12 mm
dome head
as per data sheet G3.800
|
Take advantage of the free benefits of our login area:
- CAD data download
- Download operating instructions
Welcome back! Log in to your already existing user account.