• My requests (0)
      You do not currently have any products added to your request.
      All requests
    Search
    All results
    Contact
    (636) 386-8022 Call now
    [email protected] Contact now
    Series
    B1.9405

    Threaded-body work support

    M 26 x 1.5, with metallic wiper edge
    3 types of function
    single acting, max. operating pressure 350 bar
    Threaded-body work support
    Downloads
    Catalogue sheet
    No catalog sheets available.
    Operating instructions
    Request product
    Check Pricing and Availability
    Go to Carrlane.com
    Information Series
    Description
    B 1.9405 Threaded-Body Work Supports

    Hydraulic work supports are used to provide a self-adjusting rest for the workpiece during the machining operations. They compensate the workpiece surface irregularities, also vibration and deflection under machining loads. The threaded-body design allows for space-saving and direct installation into the fixture body. Oil supply is made through drilled channels.

    In the body of the threaded-body work support a thin-walled locking bush is integrated, which locks cylindrically around the freely-movable support plunger when pressurising the element with hydraulic oil.

    There are three variations of plunger actuation:

    • Spring force
    • Air pressure
    • Oil pressure combined with spring force

    The elements are protected against penetration of swarf by a metallic wiper edge and sealed against liquids.  

     

    Products (4)
    body design
    threaded-body type M26 (4)
    functioning
    single acting (4)
    max. operating pressure [bar]
    350 (4)
    seals
    NBR (4)
    hydraulic ports
    for drilled channels (4)
    position monitoring
    without (4)
    pressure range
    high pressure (4)
    wiper
    FKM with metallic wiper edge (4)
    venting of the spring area
    without (4)
    self-locking
    without (4)
    bolt type
    with contact bolt (4)
    min. operating pressure [bar]
    100 (4)
    max. operating temperature [°C]
    80 (4)
    off-position
    extending
    return
    with spring force (4)
    contact
    plunger Ø [mm]
    16 (4)
    max. load force [kN]
    4 (4)
    plunger stroke [mm]
    max. flow rate [cm3/s]
    spring contact force [N]
    15-25 (4)
    pneumatic contact force [N/bar]
    elastic deformation [µm/kN]
    3 (4)
    Item no. CAD datafunctioningmax. operating pressure [bar]sealshydraulic ports
    Item no.
    1942900
    CAD data
    functioning
    single acting
    max. operating pressure [bar]
    350
    seals
    NBR
    hydraulic ports
    for drilled channels
    Properties
    Item no.
    1941900
    CAD data
    functioning
    single acting
    max. operating pressure [bar]
    350
    seals
    NBR
    hydraulic ports
    for drilled channels
    Properties
    Item no.
    1942900
    CAD data
    functioning
    single acting
    max. operating pressure [bar]
    350
    seals
    NBR
    hydraulic ports
    for drilled channels
    Properties
    Item no.
    1942925
    CAD data
    functioning
    single acting
    max. operating pressure [bar]
    350
    seals
    NBR
    hydraulic ports
    for drilled channels
    Properties
    Item no.
    1942900
    functioning
    single acting
    max. operating pressure [bar]
    350
    seals
    NBR
    hydraulic ports
    for drilled channels
    body design
    threaded-body type M26
    position monitoring
    without
    pressure range
    high pressure
    wiper
    FKM with metallic wiper edge
    venting of the spring area
    without
    self-locking
    without
    bolt type
    with contact bolt
    min. operating pressure [bar]
    100
    max. operating temperature [°C]
    80
    off-position
    extended
    extending
    -
    return
    with spring force
    contact
    with spring force
    plunger Ø [mm]
    16
    max. load force [kN]
    4
    plunger stroke [mm]
    6.5
    max. flow rate [cm3/s]
    -
    spring contact force [N]
    15-25
    pneumatic contact force [N/bar]
    -
    elastic deformation [µm/kN]
    3
    Item no.
    1941900
    functioning
    single acting
    max. operating pressure [bar]
    350
    seals
    NBR
    hydraulic ports
    for drilled channels
    body design
    threaded-body type M26
    position monitoring
    without
    pressure range
    high pressure
    wiper
    FKM with metallic wiper edge
    venting of the spring area
    without
    self-locking
    without
    bolt type
    with contact bolt
    min. operating pressure [bar]
    100
    max. operating temperature [°C]
    80
    off-position
    retracted
    extending
    with air pressure
    return
    with spring force
    contact
    with air pressure
    plunger Ø [mm]
    16
    max. load force [kN]
    4
    plunger stroke [mm]
    6.5
    max. flow rate [cm3/s]
    -
    spring contact force [N]
    15-25
    pneumatic contact force [N/bar]
    20
    elastic deformation [µm/kN]
    3
    Item no.
    1942900
    functioning
    single acting
    max. operating pressure [bar]
    350
    seals
    NBR
    hydraulic ports
    for drilled channels
    body design
    threaded-body type M26
    position monitoring
    without
    pressure range
    high pressure
    wiper
    FKM with metallic wiper edge
    venting of the spring area
    without
    self-locking
    without
    bolt type
    with contact bolt
    min. operating pressure [bar]
    100
    max. operating temperature [°C]
    80
    off-position
    retracted
    extending
    hydraulic
    return
    with spring force
    contact
    with spring force
    plunger Ø [mm]
    16
    max. load force [kN]
    4
    plunger stroke [mm]
    6.5
    max. flow rate [cm3/s]
    25
    spring contact force [N]
    15-25
    pneumatic contact force [N/bar]
    -
    elastic deformation [µm/kN]
    3
    Item no.
    1942925
    functioning
    single acting
    max. operating pressure [bar]
    350
    seals
    NBR
    hydraulic ports
    for drilled channels
    body design
    threaded-body type M26
    position monitoring
    without
    pressure range
    high pressure
    wiper
    FKM with metallic wiper edge
    venting of the spring area
    without
    self-locking
    without
    bolt type
    with contact bolt
    min. operating pressure [bar]
    100
    max. operating temperature [°C]
    80
    off-position
    retracted
    extending
    hydraulic
    return
    with spring force
    contact
    with spring force
    plunger Ø [mm]
    16
    max. load force [kN]
    4
    plunger stroke [mm]
    15
    max. flow rate [cm3/s]
    25
    spring contact force [N]
    15-25
    pneumatic contact force [N/bar]
    -
    elastic deformation [µm/kN]
    3
    Accessories (2)
    Item no. CAD data Description
    Item no.
    3000841
    CAD data
    /
    Description
    Seal Delrin 24 x 18 x 1,5 mm see page B1.460
    Item no.
    3420395
    CAD data
    Description
    Sharp-edged orifice Ø 0.5 mm for 1942-9XX max. 350 bar, as per data sheet B1.9405
    Error loading CAD data. Please check your internet connection and try again.
    Please note: Our CAD data are generally simplified data and primarily reflect the outer contour and connections of the product (see also Terms of use). Please always refer to the relevant catalogue sheet for the exact dimensions with tolerances, in particular the information on mounting holes or attachments such as special clamps.