• My requests (0)
      You do not currently have any products added to your request.
      All requests
    Search
    All results
    Contact
    (636) 386-8022 Call now
    [email protected] Contact now
    Series
    B1.8242

    Slide pivot clamp

    Articles and prices on request
    compact version with optional position monitoring
    double acting, max. operating pressure 350 bar
    Slide pivot clamp
    Downloads
    Catalogue sheet
    USESFR
    Operating instructions
    Information Series
    Description
    B 1.8242 Slide pivot clamps

    In the case of the slide pivot clamp the piston force is deviated by 180° by the clamping lever and is available as clamping force with virtually no loss of efficiency. Kinematics of the slide pivot clamp allow sliding back of the clamping lever during unclamping for unimpeded inser­tion of the workpieces.
    The position of the clamping lever can be monitored by inductive proximity switches or pneumatic jets. The pivot slide clamp can be installed im­mersed up to the flange surface in a hole of the fixture body or via intermediate plates which are available as an accessory. For both solu­tions there is the possibility to supply the hyd­raulic oil not only by fitting connection but also via drilled channels in the fixture body.

    Products (1)
    Article available on request
    On request, we will check whether the article is still available
    body design
    compact design (1)
    clamping stroke [mm]
    5.5 (1)
    type
    slide pivot clamp (1)
    functioning
    double acting (1)
    max. operating pressure [bar]
    350 (1)
    seals
    NBR (1)
    hydraulic ports
    pipe thread and for plug-in connector (1)
    position monitoring
    accessory: proximity switch (1)
    pressure range
    high pressure (1)
    clamping lever
    short clamping lever (1)
    max. clamping force [kN]
    10 (1)
    self-locking
    without (1)
    metallic wiper
    with (1)
    Item no. CAD datatypefunctioningmax. operating pressure [bar]seals
    Item no.
    1824040
    CAD data
    type
    slide pivot clamp
    functioning
    double acting
    max. operating pressure [bar]
    350
    seals
    NBR
    Properties
    Item no.
    1824040
    type
    slide pivot clamp
    functioning
    double acting
    max. operating pressure [bar]
    350
    seals
    NBR
    hydraulic ports
    pipe thread and for plug-in connector
    body design
    compact design
    position monitoring
    accessory: proximity switch
    pressure range
    high pressure
    clamping lever
    short clamping lever
    clamping stroke [mm]
    5.5
    max. clamping force [kN]
    10
    self-locking
    without
    metallic wiper
    with
    Accessories (8)
    Article available on request
    On request, we will check whether the article is still available
    Item no. CAD data Description
    Item no.
    3300434
    CAD data
    Description
    Socket head cap screw M10 x 55 mm, 12.9 as per data sheet B1.8242
    Item no.
    3301803
    CAD data
    Description
    Lock nut M5 x 0.5 mm as per data sheet B1.8242
    Item no.
    3456425
    CAD data
    Description
    Intermediate plate for 1824-040 as per data sheet B1.8242
    Item no.
    3610158
    CAD data
    Description
    Screw plug VSD G1/8 ED max. 400 bar, as per data sheet F9.300
    Item no.
    3612033
    CAD data
    Description
    Pneumatic jet M5 x 0.5 mm as per data sheet B1.8242
    Item no.
    3829099
    CAD data
    Description
    Connecting cable with pnp right angle plug M8 with 2 LED, cable length 5m as per data sheet G2.140
    Item no.
    3829198
    CAD data
    Description
    Inductive proximity switch PNP, 10...30 VDC as per data sheet B1.8251
    Item no.
    9210132
    CAD data
    Description
    Plug-type connector ND5 - Ø10 x 14 mm short version, with FKM seals max. 500 bar, as per data sheet F9.300
    Application examples
    Application example 1

    Slide pivot clamp B1.8242

    Error loading CAD data. Please check your internet connection and try again.
    Please note: Our CAD data are generally simplified data and primarily reflect the outer contour and connections of the product (see also Terms of use). Please always refer to the relevant catalogue sheet for the exact dimensions with tolerances, in particular the information on mounting holes or attachments such as special clamps.