Series
B1.480
Hydraulic threaded-body clamping modules
pull-type, single and double acting
with protection against torsion, max. operating pressure 500 bar
with protection against torsion, max. operating pressure 500 bar
Downloads
Catalogue sheet
No catalog sheets available.
Operating instructions
Request product
Check Pricing and Availability
Go to Carrlane.com
Information Series
Description
B 1.480 Hydraulic threaded-body clamping module
The hydraulic threaded-body clamping module pull-type was developed for screwing in into:
- Standardized housings
- Fixture bodies or manifold blocks
- Fixture base plates or intermediate plates for pallets or machine tool tables
Products (2)
Loading…
Item no. | CAD data | type | functioning | max. operating pressure [bar] | hydraulic ports | |
---|---|---|---|---|---|---|
Item no.
|
CAD data
|
Properties
| ||||
Item no.
|
CAD data
|
Properties
|
Loading…
Item no.
type
hydraulic clamping module
functioning
single and double acting
max. operating pressure [bar]
500
hydraulic ports
for drilled channels
centring function
without centring
body design
threaded-body type
min. clamping diameter [mm]
depending on the location
max. clamping diameter [mm]
depending on the location
max. low-clamping force [kN]
24.5
seal
NBR
seat check
without
connection for positive air pressure protection
without
Item no.
type
hydraulic clamping module
functioning
single and double acting
max. operating pressure [bar]
500
hydraulic ports
for drilled channels
centring function
without centring
body design
threaded-body type
min. clamping diameter [mm]
depending on the location
max. clamping diameter [mm]
depending on the location
max. low-clamping force [kN]
24.5
seal
NBR
seat check
without
connection for positive air pressure protection
without
Application examples
Application example 1
Installation of hydraulic clamping modules in the base plate of a multiple clamping fixture
Transmission of the clamping force is made by an elastomer spring element
Ø 50 x Ø 17 x 32 mm high.
The workpieces are centered by the shoulder at the flange. In such an arrangement for clamping neither a wrench is required nor a C-washer has to be handled.
Registration
New here?
Take advantage of the free benefits of our login area:
- CAD data download
- Download operating instructions
Login
Welcome back
Welcome back! Log in to your already existing user account.
Loading…
Error loading CAD data. Please check your internet connection and try again.
Please note: Our CAD data are generally simplified data and primarily reflect the outer contour and connections of the product (see also Terms of use). Please always refer to the relevant catalogue sheet for the exact dimensions with tolerances, in particular the information on mounting holes or attachments such as special clamps.
Loading…
An unexpected error has occurred. Please reload the page or try again later.