Sistemas de sujeción en torre HILMA.SCT
mechanically or hydraulically operated
jaw widths 80 and 120 mm
with 3 or 4 clamping sides
- Clamping against the fixed jaw
- mechanically or hydraulically operated
- with 3 or 4 clamping sides
- jaw widths 80 and 120 mm
Application
HILMA.SCT tower workholding systems are used on horizontal machining centres, in vertical machining in connection with 4th axis, but also on 5-axis machining centres. The applications range from manually equipped machines to pallet stations and fully automated systems.
The stability of the clamping systems and the high retention force due to the use of the special grip reversible jaw with hard metal coating make pre-embossing of the workpieces superfluous.
Description
Tower workholding systems of the HILMA.SCT series excel by a very compact design. Thanks to the adjusting spindle arranged in the upper part of the housing, deformation in the base during clamping is reduced.
All essential components are made of steel.
Referencia | Datos CAD | tipo | accionamiento | fuerza máx. de sujeción [kN] | principio de sujeción | |
---|---|---|---|---|---|---|
Referencia
|
Datos CAD
|
Propiedades
| ||||
Referencia
|
Propiedades
| |||||
Referencia
|
Propiedades
| |||||
Referencia
|
Propiedades
| |||||
Referencia
|
Datos CAD
|
Propiedades
|
Referencia | Datos CAD | Descripción |
---|---|---|
Referencia
|
Descripción
Plug-in connector Ø12 x 19 mm
as per data sheet WS 5.450Z
|
|
Referencia
|
Datos CAD
|
Descripción
Fine step reversible jaw for HILMA.SCS 80
hardened and ground
jaw width 80/80 mm
as per data sheet WS 5.460Z
|
Referencia
|
Descripción
Fine step reversible jaw for HILMA.SCS 120
hardened and ground
jaw width 120/120 mm
as per data sheet WS 5.460Z
|
Aproveche nuestra zona de login gratuita:
- Descarga de datos CAD
- Descarga de instrucciones de servicio
¡Bienvenido de nuevo! Inicie sesión con su cuenta de usuario ya existente.'